Wholesale Electrogalvanized Supplier, Factories

Electrogalvanized steel codes combine three elements:  

  1. Base metal grade (e.g., SPCC, SPCD)  
  2. Process identifier "E" (electrogalvanized)  
  3. Zinc coating specification (type/mass)  

Product Description

Categories of electro-galvanized material Standards and grades Max Zn Coating
(g/m²)
Thickness
(mm)
Width
(mm)
Length
(mm)
Coil inside diameter
(mm)
Grade Standard
General use SECC, BLCE+Z, DC01E+Z Q/BQB430-2009 90/90 0.3-3.5 800-1830 1000-6000 508, 610
Used for drawing SECD, BLDE+Z, DC03E+Z
Used for deep drawing SECE, BUSDE+Z, DC04E+Z
Used for special deep drawing SECF, DC05E+Z, BUFDE+Z
Used for extra deep drawing BSUFDE+Z, DC06E+Z
Used for special extra deep drawing DC07E+Z
SMSTEEL

Application & Specifications

Product Grade Designations

Through electrogalvanizing, base cold-rolled steel products transition into enhanced corrosion-resistant grades:

SPCC → SECC
SPCD → SECD
SPCE → SECE
SPCF → SECF
SPCG → SECG
Electrogalvanizing Process

Electrogalvanizing electrodeposits a zinc layer onto steel substrates using DC current through a zinc-salt electrolyte solution. Key benefits include:

  • Provides superior corrosion resistance
  • Extends overall service life
  • Enhances aesthetic quality and surface finish
Corrosion Protection Mechanism

Zinc's oxidation resistance protects steel in both dry and humid environments. If damaged, a zinc-steel galvanic couple sacrificially protects the substrate.

Standard Process Flow
1
Surface Preparation: Alkaline degreasing → Hot water rinse → Acid pickling → Rinsing
2
Electroplating: Zinc electrodeposition → Rinsing
3
Post-treatment: Chromate passivation → Hot water rinse → Drying
4
Quality Assurance: Inspection → Packaging
SMSTEEL

Products Display

QUESTIONS & ANSWERS

Frequently Asked Questions

What is electro-galvanized steel material?
Electro-galvanized steel is cold-rolled steel coated with a thin layer of zinc through electrodeposition using a DC electric current. This process grants superior corrosion protection, excellent surface smoothness, and enhanced paintability compared to untreated steel.
What are the common equivalent grades for electro-galvanized steel?
Common electro-galvanized grades include SECC (general use), SECD (drawing quality), SECE (deep drawing), SECF (special deep drawing), and SECG. These correspond to base materials like SPCC, SPCD, and SPCE.
What available thickness and width dimensions are supplied?
Our electro-galvanized products typically range in thickness from 0.3mm to 3.5mm, widths from 800mm to 1830mm, and lengths from 1000mm to 6000mm, with coil inner diameters of 508mm or 610mm.
How does sacrificial zinc protection work on electro-galvanized steel?
Zinc provides both a physical barrier against moisture and atmospheric exposure, as well as galvanic protection. If the outer surface is scratched or cut, the zinc layer preferentially oxidizes (sacrificial anode) to protect the underlying steel substrate from rusting.
What standard governs these electro-galvanized steel specs?
The specifications detailed in our parameter table adhere strictly to standard Q/BQB430-2009, offering maximum zinc coating weights up to 90/90 g/m².
What primary post-treatments are applied during production?
After zinc electrodeposition, products undergo post-treatment including chromate passivation, hot water rinsing, and thorough drying to stabilize the protective zinc layer and optimize surface adhesion.

Related Products