High-Quality SECC/SECD/SECE 20/20 coating Electro-galvanized steel plate Manufacturer, Factory

Electro-galvanization employs an electric current to deposit dissolved zinc onto the surface of the material to be plated. This method offers uniform coating thickness and decorative properties, making it a preferred choice for various applications. However, unlike hot-dip galvanization, electro-galvanized materials typically undergo chromate treatment to enhance corrosion resistance and prevent white powdery corrosion formation.

Product Description

SMSTEEL

The Electroplating Production Process

Below is a detailed description of the important steps in the electroplating process:

1. Surface Preparation & Pretreatment

This is the most crucial step in the electroplating process, as the surface of the steel sheet must be perfectly prepared before electroplating.

a. Surface Cleaning:
Thoroughly clean the steel sheet to remove impurities, dust, and grease. This ensures that the electroplated layer can firmly and evenly adhere to the metal surface.
b. Surface Pretreatment:
The steel sheet can be pretreated using methods such as sandblasting, abrasion, or chemical cleaning. This helps create a smooth and uniform surface, enhancing the adhesion of the electroplated layer.

2. Electroplating Process

After the steel sheet’s surface is prepared, the electroplating process begins inside a container with an electroplating solution.

a. Pre-treatment:
Before immersion in the electroplating solution, the sheet undergoes immersion in an alkaline solution to clean the surface once again and increase metal conductivity.
b. Zinc Electroplating:
The steel sheet is fully immersed in zinc plating solution. Electric current releases zinc ions which deposit onto the steel surface, forming a firmly adhered zinc layer.
c. Adjusting the Plating Layer:
Adjusting current and contact time controls layer thickness, regulating quality and thickness to meet specific product requirements.
Electroplating Production Process
SMSTEEL

Product Parameters

Series Galvanized oiled sheet Galvanized fingerprint-resistant sheet Special fingerprint-resistant sheet for TV/MNT backplane Low gloss galvanized fingerprint-resistant sheet Self-lubricating fingerprint-resistant sheet special for motor
Grade SECC-O
SECD-O
SECE-O
SECC-NM SECD-N5
SECE-N5
SECC-NM SECC-SL
SECD-SL
Thickness 0.4--1.6mm
Width 900mm--1350mm
Inner diameter of coil sheet 610mm
Weight per roll 6-13T
Zinc layer thickness 3um Single side
Zinc layer weight 20g/m2 Single side
Coating layer thickness Oiling: 500mg/m2 Single side Fingerprint resistance: Single side 1-1.4um Fingerprint resistance: Single side 1.8-2.2um
SMSTEEL

Applications of Electroplated Steel

1. Construction Industry

Electroplated steel is widely used in the construction industry, especially in infrastructure and industrial architecture projects. Thanks to its corrosion resistance and durability, it is favored for manufacturing roofing sheets, water pipes, drainage pipes, faucets, and ventilation systems. It also shields and protects other metal components, enhancing their lifespan.

2. Automotive & Motorcycle Industry

In the automotive and motorcycle industries, electroplated steel produces exterior parts and components. The zinc layer protects vehicle frames and surfaces from water, dust, and pollutants, prolonging vehicle life and maintaining aesthetics. It is also used in load-bearing components like sliders and kickstands.

3. Consumer Goods Manufacturing

Electroplated steel finds diverse applications in manufacturing consumer goods and household products. In electronics, it creates oxidation-resistant layers for screws, buttons, and circuits. In household goods, it produces shiny, corrosion-resistant products like pots, pans, and dishes.

4. Daily Life Applications

Apart from traditional industries, it is used for decorative items, advertising signs, and interior furnishings. It is also utilized in equipment for customs, agriculture, and the oil & gas industry, contributing significantly to modern technological progress.

Conclusion

Electroplated steel has firmly established its essential role in protecting and strengthening steel products. With its superior corrosion resistance, diverse aesthetics, cost-effectiveness, and environmental protection, electroplated steel drives advancements in various industrial sectors and positively impacts our daily lives. Currently, the demand for electroplated steel is continuously increasing, creating a broad and promising outlook for future development.

FAQ

Frequently Asked Questions

What is the primary purpose of surface preparation in electroplating?

Surface preparation thoroughly cleans the steel sheet to remove impurities, dust, and grease, ensuring that the electroplated zinc layer adheres firmly and evenly to the metal surface.

How is the thickness of the electroplated zinc layer controlled?

The thickness and overall quality of the zinc layer are precisely controlled by adjusting the electrical current and contact time during the electroplating bath process.

What standard thickness and width options are available for these steel sheets?

SMSTEEL galvanized sheets typically range in thickness from 0.4mm to 1.6mm and offer coil widths ranging from 900mm to 1350mm.

Why is electroplated steel suitable for TV and monitor backplanes?

Special fingerprint-resistant electroplated sheets (such as SECD-N5 / SECE-N5) offer exceptional surface cleanliness, oxidation resistance, and aesthetic durability, making them ideal for delicate electronic enclosures.

How does electroplating protect automotive components?

The electroplated zinc layer acts as a barrier protecting steel surfaces from moisture, road salts, and pollutants, preventing rust and prolonging structural component lifespans.

Related Products