High-grade flat rolled steel coils, silicon electrical steel, and structural sections optimized for rigorous global manufacturing specifications.
Cold rolled steel (CRS) represents the pinnacle of surface perfection, dimensional control, and mechanical predictability in modern metallurgy.
Through multi-stand cold reduction mills, hot-rolled pickled coils are deformed below their recrystallization temperature. This work-hardening process increases yield strength by up to 50% and tensile strength dramatically, yielding ultra-flat, high-density metal matrix profiles.
To restore formability after cold reduction, our coils undergo 100% pure hydrogen bell-type or continuous annealing. This controlled atmosphere eliminates surface carbon residue, prevents oxidation, and produces ductile grain structures suited for severe deep-drawing operations.
A light temper pass (skin pass) eliminates yield point elongation (Lüders lines), locks in optimal surface roughness (Ra 0.6–1.2 µm), and establishes superior flatness for direct electro-plating, phosphatizing, or high-gloss automotive painting.
Information Gain Insight: Selecting the correct cold rolled steel grade depends heavily on balancing work-hardening response against post-anneal ductility. While SPCC/DC01 grades offer exceptional cost efficiency for general bending, deep-drawing requirements demand DC04/SPCE or ultra-low carbon DC06 (EDDQ) steel to prevent micro-cracking during hydraulic pressing.
| EN Standard | JIS Standard | ASTM Standard | Yield Strength (MPa) | Tensile Strength (MPa) | Elongation (A80 Min %) | Primary Industrial Application |
|---|---|---|---|---|---|---|
| DC01 | SPCC | ASTM A1008 CS Type B | 140 – 280 | 270 – 410 | ≥ 28 | General fabrication, metal furniture, electrical enclosures |
| DC03 | SPCD | ASTM A1008 DS Type B | 140 – 240 | 270 – 370 | ≥ 34 | Stamping, automotive interior brackets, moderate deep drawing |
| DC04 | SPCE | ASTM A1008 DDS | 140 – 210 | 270 – 350 | ≥ 38 | Complex deep drawing, HVAC housings, washing machine tubs |
| DC06 | SPCF | ASTM A1008 EDDS | 120 – 180 | 270 – 330 | ≥ 41 | Extra deep drawing, complex auto body panels, oil pans |
| Full Hard (FH) | SPCC-1D | ASTM A1008 Full Hard | ≥ 550 | ≥ 570 | ≤ 3 | Substrate for GI/GL roofing, unbent structural webbing |
Exploring advanced metallurgy, ultra-thin precision gauges, decarbonization, and smart digital twin manufacturing lines.
As global enterprise buyers align with EU CBAM (Carbon Border Adjustment Mechanism) and carbon neutrality mandates, SMSTEEL is transitioning heating furnaces from fossil gas to green hydrogen-blend combustion systems, drastically lowering scope 1 and scope 2 embedded carbon emissions.
Future cold rolling facilities prioritize Dual-Phase (DP590/780/980) and Complex-Phase (CP) steel development. These micro-alloyed cold rolled grades deliver multi-gigapascal structural integrity for electric vehicle (EV) battery enclosures and anti-collision crash beams without adding weight.
Integrating automated gauge control (AGC) with inline laser thickness sensors and digital twin simulations ensures dynamic roll-gap adjustments every millisecond. This reduces thickness variation down to ±0.005mm across 1500mm-wide mother coils, minimizing material waste during high-speed stamping.
From high-speed electrical motors to precision home appliance panels, SMSTEEL supplies cold rolled raw materials customized for demanding processing lines.
Automotive manufacturers demand high surface purity (O5 quality) and consistent mechanical properties. SMSTEEL cold rolled coils (DC04, DC06, SPCE) provide exceptional deep-drawing capability, eliminating Lüders lines and surface stretcher strains on hood outer panels, side body panels, and structural chassis reinforcements.
Cold rolled non-grain-oriented (CRNGO) silicon steel is essential for high-efficiency electric motors, generators, and hermetic compressors. By controlling silicon content (1.0%–3.5%) and texture grain orientation during cold rolling, core iron losses (e.g., M310-50A, M350-50A) are drastically reduced, elevating electrical conversion efficiency.
Home appliances—such as refrigerator side panels, washing machine drums, and microwave cabinets—require flat, smooth cold rolled coils suitable for electro-galvanizing (SECC) or direct powder coating. Our skin-passed CR coils guarantee uniform paint adhesion, zero orange-peel effect, and superior corrosion resistance after painting.
Operating out of Tianjin’s primary industrial development area, SMSTEEL integrates advanced mill technology with direct port logistics to ensure uninterrupted global deliveries.
Housing 8 high-frequency welded tube lines, precision slitting units, and tension-leveling lines, our facility operates with over 300 skilled technicians, producing over 100,000 metric tons monthly to sustain high-volume global procurement requirements.
Equipped with 4K high-speed optical camera arrays, our automated surface inspection systems detect micro-defects—such as pinholes, oil spots, scratches, or scale indentations—at line speeds exceeding 800 meters per minute, providing 100% surface quality traceability.
To withstand long-distance maritime transport across multiple climate zones, SMSTEEL coils are packed using anti-rust Vapor Corrosion Inhibitor (VCI) paper, heavy-duty galvanized steel outer rings, radial/circumferential steel strapping, and wooden pallets built for side/top forklift loading.
Complete documentation, third-party inspection readiness, and compliance with international environmental and quality benchmarks.
Every shipment includes a full Mill Test Certificate detailing chemical ladle analysis, mechanical yield/tensile strength, elongation, grain size, and coating weight (if applicable).
All cold rolled steel coils and sheets are fully compliant with EU REACH regulations and RoHS environmental standards, certifying zero heavy metal contamination or hazardous oil additives.
Our manufacturing facilities operate strictly under certified Quality Management (ISO 9001:2015) and Environmental Management (ISO 14001:2015) frameworks, maintaining total consistency.
We welcome third-party quality verification agencies—including SGS, BV, TÜV, and Intertek—to perform visual, dimensional, and metallurgical testing prior to port loading.
Streamlining the procurement lifecycle for importers, service centers, and OEM stamping factories worldwide.
To accelerate pricing turnarounds, specify steel standard (e.g., EN 10130 DC01), coil dimensions (Thickness × Width), inside diameter (508mm or 610mm), oiling level (lightly oiled, heavy slushing oil, or dry), max coil weight, and destination port. SMSTEEL guarantees RFQ responses within 24 hours.
Equipped with ultra-sharp rotary gang slitters and flying shears, SMSTEEL offers custom narrow strip slitting (widths down to 19mm) and custom sheet leveling with tight length tolerances (±0.5mm), reducing pre-processing labor at customer stamping facilities.
To enable risk-free sample verification and mold trial testing, SMSTEEL supports low Minimum Order Quantities (MOQs) for trial batches. Buyers can inspect physical grain structures, perform bend testing, and evaluate chemical compliance prior to scaling to high-tonnage monthly contracts.
Expert technical clarification regarding cold rolled steel grade selection, processing parameters, and international delivery standards.
While HRPO steel has scale removed via acid pickling, it retains a hot-rolled grain structure with wider thickness tolerances (typically ±0.15mm) and lower yield strength. Cold Rolled Steel undergoes cold reduction below recrystallization temperature, yielding significantly tighter thickness tolerances (±0.01mm to ±0.03mm), superior surface smoothness (Ra 0.6–1.2 µm), and higher yield strength due to strain hardening before annealing.
JIS G3141 grades denote increasing levels of ductility and drawability. SPCC is commercial quality meant for general bending and light forming. SPCD is drawing quality designed for moderate press stamping. SPCE is deep-drawing quality (equivalent to EN 10130 DC04) containing ultra-low carbon levels, specifically treated to prevent stretcher strain marks (Lüders lines) during deep hydraulic forming.
Full Hard Cold Rolled Steel (SPCC-1D / Full Hard) is coil that has undergone cold rolling reduction without undergoing annealing. It exhibits extremely high yield strength (≥550 MPa) and very low elongation (≤3%). It is primarily used as feedstock for hot-dip galvanizing lines, unbent flat paneling, or specialized structural components that require extreme stiffness without forming.
After continuous or batch annealing, soft carbon steel exhibits a discontinuous yield point, which causes visible surface flaws known as stretcher strain lines or Lüders lines during press forming. Skin pass temper rolling applies a minor thickness reduction (0.5% to 1.5%) to eliminate yield point elongation, impart precise surface roughness (matte or bright finish), and optimize coil flatness.
We apply neutral anti-rust oil (DOS or electrostatic oiling at 1000–2000 mg/m²) based on customer requirements, combined with multi-layer seaworthy export packaging. This includes inner plastic film wrap, high-density Vapor Corrosion Inhibitor (VCI) paper, steel inner/outer corner protectors, galvanized metal corrugated wrapping, and heavy-duty steel strapping anchored to sturdy wooden pallets.
When requesting quotes for Cold Rolled Non-Oriented Silicon Steel (CRNGO), buyers should specify nominal thickness (e.g., 0.35mm, 0.50mm), grade or maximum core loss at 50Hz/1.5T (e.g., M310-50A, 50W310), width, coating type (e.g., insulating varnish C-3, C-5), coil ID (508mm), and annual or spot volume requirements.
SMSTEEL operates automated gauge control systems complying with EN 10131 and ASTM A568 special precision tolerances. Standard thickness tolerance is held within ±0.015mm for gauges under 1.0mm, and width tolerance for mill edges is held within ±0.2mm for slitted strips.
Complementary steel lines including galvannealed coils, electro-galvanized plates, tinplate, and structural pipe fittings.