Explore our top-tier cold rolled steel sheets, extra deep drawing quality (EDDQ) coils, high-zinc structural pipes, and specialized alloy strips manufactured for global distribution.
An authoritative breakdown of mechanical strain hardening, recrystallization annealing cycles, surface roughness control, and grain boundary orientation in cold-reduced carbon steel processing.
Technical Insight: Cold rolling is not merely a dimensional thickness reduction process. By applying heavy mechanical work below the recrystallization temperature (ambient room temperature), dislocation density within the ferrite crystal matrix increases exponentially, elevating yield strength ($R_{eH}$) while creating localized plastic strain. Subsequent continuous annealing (CAL) or batch annealing (BAF) precisely restores ductility, yielding unmatched drawability ($r$-value) and strain hardening exponent ($n$-value) for modern precision engineering.
Through plastic deformation via multi-stand tandem mills, hot rolled pickling coils experience work hardening. The severe grain refinement significantly enhances tensile stability, dimensional uniformity, and structural yield thresholds across thin gauge ranges (0.15 mm to 3.0 mm).
Integrated hydrogen-rich protective continuous annealing lines (CAL) rapidly heating up to 700°C–850°C trigger controlled recrystallization. This eliminates yield point elongation (stretcher strain marks) and guarantees consistent mechanical isotropy for high-speed automated stamping.
A final light pass (0.5%–2.0% reduction) on a high-precision temper mill imparts micro-textured surface roughness ($R_a$ 0.6–1.2 µm). This specific topography optimizes lubricant retention during deep drawing and ensures superior paint adherence for automotive and appliance enameling.
| Steel Grade Standard | Equivalent Designation | Yield Strength (MPa) | Tensile Strength (MPa) | Elongation $A_{80}$ (%) | Plastic Strain Ratio ($r_{90}$) | Primary Industrial Application |
|---|---|---|---|---|---|---|
| EN 10130 DC01 | JIS SPCC / ASTM A1008 CS Type B | 140 – 280 | 270 – 410 | ≥ 28 | ≥ 1.2 | General forming, unexposed auto panels, electrical enclosures |
| EN 10130 DC03 | JIS SPCD / ASTM A1008 DS | 140 – 240 | 270 – 370 | ≥ 34 | ≥ 1.5 | Deep drawing, domestic appliance housings, complex pressings |
| EN 10130 DC04 | JIS SPCE / ASTM A1008 DDS | 140 – 210 | 270 – 350 | ≥ 38 | ≥ 1.8 | Extra deep drawing (EDDQ), automotive oil pans, hermetic compressors |
| EN 10130 DC06 | JIS SPCG / ASTM A1008 EDDS | ≤ 180 | 270 – 330 | ≥ 41 | ≥ 2.1 | Ultra-deep drawing (IF interstitial-free steel), complex body-in-white structures |
| EN 10268 HC340LA | ASTM A1008 HSLAS Grade 50 | 340 – 420 | 410 – 510 | ≥ 21 | — | High-strength structural components, chassis reinforcement, crash beams |
Connecting primary steel manufacturing directly with tier-1 industrial manufacturing lines across North America, Europe, Asia-Pacific, and emerging manufacturing hubs.
As global automakers shift toward EV platforms and carbon emission reductions, our cold rolled dual-phase (DP) and trip steels provide extreme tensile energy absorption without adding vehicle mass. By maintaining precise $r$-values and minimal springback during stamping, tier-1 OEMs achieve higher structural yield integrity for battery enclosures and safety cage columns.
Precision cold rolling is fundamental for Cold Rolled Non-Grain Oriented (CRNGO) and Grain Oriented (CRGO) electrical silicon steels. Our factory utilizes multi-pass reverse cold rolling mills to yield strip thicknesses down to 0.23 mm - 0.50 mm with ultra-low core loss ($W_{15/50} \le 2.3 \text{ W/kg}$) for high-efficiency electric motors, generators, and power distribution grid transformers.
White goods manufacturers require pristine surface quality devoid of pinholes, scratches, or stretcher strain marks. Our cold rolled steel sheets (SPCC/DC01) provide flat surface profiles engineered for automatic powder coating, electro-galvanizing (SECC), and galvannealing (ZF coating), ensuring high corrosion resistance in humid tropical ambient conditions.
Facing international environmental regulations like the European Union's Carbon Border Adjustment Mechanism (CBAM), our production lines integrate energy-efficient scrap-supplemented EAF/BOF routes, recycled hydrogen atmosphere annealing furnaces, and verified Environmental Product Declarations (EPD) to ensure your international supply chain remains compliant and tariff-resilient.
Take a look inside our 66,700 m² Tianjin production infrastructure, featuring 5-stand continuous tandem cold mills, automated AGC thickness gauges, and hydrogen protective annealing technology.
Turbulent HCl bath removes hot-rolled iron oxide scale ($Fe_2O_3$, $Fe_3O_4$).
5-Stand 6-High tandem cold reduction mill compresses thickness down to target gauge.
Alkaline degreasing bath removes residual rolling oils prior to heat treatment.
Controlled $H_2/N_2$ atmosphere relieves internal stress and restores grain ductility.
Eliminates yield elongation; imparts target surface roughness ($R_a$) and flatness.
Automatic laser surface defect detection, anti-rust oiling, and VCI wrapping.
Our continuous tandem mills feature hydraulic AGC systems paired with X-ray thickness measurement sensors. Operating at mill speeds exceeding 1,200 m/min, the dynamic response system maintains longitudinal thickness variations within $\pm 0.005 \text{ mm}$, preventing wall thickness inconsistencies during customer roll-forming operations.
Tailoring chemistry, mechanical tolerances, and surface oiling to comply with regional procurement specs across major industrial continents.
Full compliance with ASTM A1008/A1008M for cold rolled carbon sheet steel in Commercial Steel (CS Types A, B, C), Drawing Steel (DS Types A, B), and Deep Drawing Steel (DDS). Custom imperial slit widths (e.g., 36", 48", 60") with standard or dry electrostatic oiling.
Direct mill supply under EN 10130 (DC01 to DC07) and EN 10268 (High yield micro-alloyed steels HC260LA to HC420LA). Available in surface finishes 'A' (normal surface) or 'B' (improved surface for exposed painting) with REACH & RoHS environmental compliance.
Complete manufacturing matrix for JIS G3141 (SPCC, SPCD, SPCE, SPCF, SPCG) and GB/T 5213. Specialized temper designation options including Full Hard (1/8 Hard, 1/4 Hard, 1/2 Hard, Full Hard HRB ≥ 85) for unannealed structural tubing strip.
Cold rolled steel is susceptible to surface oxidation during long ocean voyages. We implement military-grade VCI anti-rust barrier packaging to guarantee pristine delivery.
Coils and sheet packs are wrapped in Volatile Corrosion Inhibitor (VCI) paper and heavy-duty polyethylene film, establishing an active molecular vapor layer that neutralizes ambient moisture inside containerized shipments.
Coils can be strapped Eye-to-Sky or Eye-to-Wall using heavy-duty steel bands, wooden pallets, outer metallic edge protectors, and corrugated paper sleeves to withstand dynamic ocean vessel pitching.
Every single heat/coil number is fully traceable to original blast furnace ladles. We issue EN 10204 3.1 Mill Test Certificates detailing exact chemical ladles (C, Mn, P, S, Si, Al) and mechanical test results.
Explore our broader manufacturing catalog including electro-galvanized plates, ZM zinc-aluminum-magnesium solar structural steels, PPGI roofing sheets, and structural hollow sections.
In-depth technical answers addressing critical purchasing questions, yield strength criteria, surface treatment selection, and structural engineering compliance.