Below is a detailed description of the important steps in the electroplating process:
This is the most crucial step in the electroplating process, as the surface of the steel sheet must be perfectly prepared before electroplating. This process includes the following steps:
a. Surface Cleaning: Thoroughly clean the steel sheet to remove impurities, dust, and grease. This ensures that the electroplated layer can firmly and evenly adhere to the metal surface.
b. Surface Pretreatment: The steel sheet can be pretreated using methods such as sandblasting, abrasion, or chemical cleaning. This helps create a smooth and uniform surface, enhancing the adhesion of the electroplated layer.
After the steel sheetโs surface is prepared, the electroplating process begins. This process usually takes place in a container with an electroplating solution. The steps in the electroplating process include:
a. Pre-treatment: Before immersing the steel sheet into the electroplating solution, it undergoes pre-treatment by immersion in an alkaline solution to clean the surface once again and increase the metalโs conductivity.
b. Zinc Electroplating: The steel sheet is fully immersed in the zinc plating solution. As the current passes through the solution, zinc ions are released, leading to the electroplating process. Zinc ions are deposited onto the surface of the steel sheet, forming a firmly adhered zinc layer.
c. Adjusting the Plating Layer: Adjusting the current and contact time in the electroplating process can control the thickness of the zinc plating layer. This helps regulate the quality and thickness of the electroplated layer to meet specific product requirements.
| Series | Galvanized oiled sheet | Galvanized fingerprint-resistant sheet | Special fingerprint-resistant sheet for TV/MNT backplane | Low gloss galvanized fingerprint-resistant sheet | Self-lubricating fingerprint-resistant sheet special for motor |
|---|---|---|---|---|---|
| Grade | SECC-O SECD-O SECE-O |
SECC-NM | SECD-N5 SECE-N5 |
SECC-NM | SECC-SL SECD-SL |
| Thickness | 0.4--1.6mm | ||||
| Width | 900mm--1350mm | ||||
| Inner diameter of coil sheet | 610mm | ||||
| Weight per roll | 6-13T | ||||
| Zinc layer thickness | 3um Single side | ||||
| Zinc layer weight | 20g/m2 Single side | ||||
| Coating layer thickness | Oiling: 500mg/m2 Single side | Fingerprint resistance: Single side 1-1.4um | Fingerprint resistance: Single side 1.8-2.2um | ||
Electroplated steel is widely used in the construction industry, especially in infrastructure and industrial architecture projects. Thanks to its corrosion resistance and durability, it is favored for manufacturing roofing sheets, water pipes, drainage pipes, faucets, and ventilation systems. It is also used to shield and protect other metal components, enhancing lifespan and reducing weather impact.
In these industries, electroplated steel is applied to produce exterior parts and components. The zinc layer protects the vehicle frame and metal surfaces from corrosion caused by water, dust, and pollutants, prolonging vehicle life. It is also used in load-bearing components like sliders and kickstands to strengthen durability.
Electroplated steel finds diverse applications in consumer goods. In electronics, it creates a corrosion-resistant layer for components like screws, buttons, and circuits. In household goods, it is commonly employed to produce shiny, corrosion-resistant products such as pots, pans, dishes, and other daily items.
Apart from traditional industries, it is used to produce decorative items, advertising signs, and aesthetically pleasing interior furnishings. It is also utilized in manufacturing equipment for agriculture, customs, and the oil and gas industry, making it an integral part of modern societal development.
Electroplated steel has firmly established its essential role in protecting and strengthening steel products. With its superior corrosion resistance, diverse aesthetics, cost-effectiveness, and environmental protection, electroplated steel drives advancements in various industrial sectors and positively impacts our daily lives. Currently, the demand for electroplated steel is continuously increasing, creating a broad and promising outlook for future development.
Surface preparation and pretreatment is considered the most crucial step. The steel sheet must be thoroughly cleaned of impurities, dust, and grease, and properly pretreated to ensure the electroplated layer can firmly and evenly adhere to the metal surface.
The steel sheet is fully immersed in a zinc plating solution. As an electrical current passes through the solution, zinc ions are released and deposited onto the surface of the steel sheet, forming a firmly adhered zinc layer.
The thickness and quality of the zinc plating layer can be precisely controlled by adjusting the electrical current and the contact time during the electroplating process to meet specific product requirements.
It is widely used because of its excellent corrosion resistance and durability. It is ideal for manufacturing roofing sheets, water pipes, and ventilation systems, effectively protecting structures from harsh weather and environmental impacts.
In the automotive and motorcycle industries, the zinc electroplating layer protects vehicle frames and exterior components from rust and corrosion caused by water and environmental pollutants, thereby extending the vehicle's lifespan.
Yes, electroplated steel is frequently used to manufacture shiny, corrosion-resistant consumer goods, including pots, pans, dishes, electronic components, and various decorative interior furnishings.