Direct mill-supplied cold-rolled, electro-galvanized, hot-dip, and specialized structural steel sections engineered for international industrial applications.
In-depth analysis of cold-rolled steel substrates, electrodeposition kinetics, coating mass uniformity, and surface passivation treatments.
Electro-galvanizing (EG) deposits pure zinc atoms onto cold-rolled coil (CR Steel Substrate) through aqueous electrolysis at ambient temperatures. Unlike Hot-Dip Galvanizing (HDG), EG eliminates thermal stress and heat-affected metallurgical deformation, preserving strict mechanical properties, ultra-smooth spangle-free aesthetics, and exceptional dimensional flatness essential for high-speed automated stamping.
We supply premier Japanese JIS G3313 and European EN 10152 compliant grades: SECC (Commercial Quality for general bending), SECD (Drawing Quality for moderate deep-drawing), SECE (Deep Drawing Quality for complex geometric contours), and SECF (Extra Deep Drawing Quality for automotive structural shells).
To eliminate white rust during storage and enhance post-painting adhesion, EG coils undergo advanced surface passivations: Fingerprint-Resistant Organic/Inorganic Coating (AFP), RoHS-compliant trivalent Chromium-Free Passivation (C5), and Phosphating (P) optimized for direct electrostatic paint application.
| Steel Grade Standard | Yield Strength (MPa) | Tensile Strength (MPa) | Elongation Min (%) | Coating Weights Available | Primary Industrial Use Case |
|---|---|---|---|---|---|
| SECC (JIS G3313) / DC01+ZE | 140 - 260 | 270 - 410 | ≥ 32% | 10/10, 20/20, 30/30 g/m² | Computer Chassis, Server Racks, Distribution Boxes |
| SECD (JIS G3313) / DC03+ZE | 120 - 220 | 270 - 370 | ≥ 36% | 20/20, 40/40, 60/60 g/m² | Appliance Panels, Deep Stamped Enclosures |
| SECE (JIS G3313) / DC04+ZE | 120 - 180 | 270 - 350 | ≥ 39% | 20/20, 40/40, 60/60 g/m² | Automotive Interior Structural Reinforcements |
| Zn-Ni Alloy EG Coils | 200 - 340 | 340 - 480 | ≥ 30% | 15/15, 30/30 g/m² (10-14% Ni) | EV Battery Casing Shielding & Automotive Underbody |
Providing precision engineering steel for severe stamping demands, high aesthetic surface standards, and critical electromagnetic compatibility.
Modern electric vehicle (EV) architectures demand non-porous, corrosion-protected sheets for battery pack protective trays, door interior frame assemblies, and complex dashboard structural brackets. Electro-galvanized coils with differential zinc coating weights (e.g., 40g/m² exterior / 20g/m² interior) enable exceptional spot welding efficiency without sacrificing atmospheric anti-corrosion protection in exposed underbody zones.
Hyperscale data centers require 19-inch rack enclosures, server chassis, and telecommunication switch boxes engineered to micron-level tolerances. SECC steel with Anti-Fingerprint (AFP) treatment prevents oxidation from operator handling, offers superior surface conductivity for Electromagnetic Interference (EMI) shielding, and eliminates paint flaking during automated punching and laser cutting.
For premium residential washing machine side panels, refrigerator backplanes, air conditioner outdoor unit framing, and microwave cavity walls, SECD and SECE electrogalvanized coils provide unmatched deep drawing capability. The thin, uniform zinc matrix prevents micro-cracking during extreme bending radii, ensuring pristine surface smoothness for top-tier electrostatic powder coating finishes.
In high-rise construction, EG steel coils are slit into narrow strips for acoustic ceiling channels, fire-rated elevator door skins, cleanroom wall partitions, and heavy-duty cable tray systems. The zero-spangle surface allows seamless powder coating with zero telegraphing or orange-peel defect, delivering pristine indoor architectural finishes.
Advancing electrogalvanizing technology through nano-alloy electrodeposition, bio-based green passivation, and AI-driven production line intelligence.
Transitioning from pure zinc electrodeposition to Zinc-Nickel alloy (10-14% Ni content) plating yields up to 5 times higher corrosion resistance at equivalent coating mass. This breakthrough allows automotive engineers to reduce overall coating weight while meeting rigorous 1,500-hour cyclic neutral salt spray tests (NSS).
Next-generation Anti-Fingerprint coatings replace synthetic acrylic polymers with self-healing, bio-based nano-silica matrices. These non-toxic coatings maintain superior lubricity during high-speed stamping operations and withstand elevated continuous operating temperatures (up to 200°C) without discoloration.
Aligning with global ESG mandates, our cold-rolled steel feeds are increasingly sourced from Direct Reduced Iron (DRI) and Electric Arc Furnace (EAF) routes powered by green hydrogen and renewable power, slashing Scope 1 and Scope 2 embodied carbon footprints by up to 60% per ton.
Integrating high-speed continuous electro-galvanizing lines (EGL) with AI closed-loop control to deliver competitive global steel solutions.
Our Tianjin smart factory operates modern continuous electro-galvanizing lines equipped with vertical plating cells, automated dynamic current density adjustment, and automated electrolyte chemical titration systems. This guarantees accurate zinc deposition across strip widths up to 1,500 mm at line speeds exceeding 150 m/min.
Every millimeter of steel strip is scanned in real-time by high-speed Automated Optical Inspection (AOI) cameras capable of detecting micro-defects such as pinholes, oil spots, scratch marks, and coating gauge variations down to 0.01 mm, immediately marking defect zones for automated line trimming.
Located near Tianjin Port—Northern China's largest maritime shipping hub—our integrated logistics infrastructure enables seamless containerized and breakbulk ocean freight dispatch. Strategic buffer inventory management guarantees consistent lead times under 20 days for custom coil orders.
Comprehensive standard cross-referencing, multi-stage mill testing protocols, and seaworthy export packaging standards.
Our metallurgical engineers ensure seamless material translation between global industrial standards, reducing sourcing risk for international EPC contractors and OEM manufacturers:
Every shipped steel master coil is accompanied by an authentic EN 10204 3.1 Mill Test Certificate (MTC) detailing chemical heat analysis, yield/tensile strength, elongation percentage, Olsen cup draw values, coating weight verification via X-ray fluorescence, and salt spray test results. Third-party inspection by SGS, BV, or Intertek is fully integrated upon request.
To eliminate rust, moisture ingress, and transit deformation during long-distance ocean voyages, our electro-galvanized coils undergo premium multi-layer protective packaging:
Full adherence to international chemical safety, environmental directives, and customs regulatory frameworks.
Our trivalent chromium passivated and chromate-free finger-print resistant electro-galvanized coils fully comply with European RoHS Directive 2011/65/EU (and amendment 2015/863) and REACH Regulation (EC) No 1907/2006, guaranteeing complete freedom from hazardous substances for consumer product sales in EU and North American markets.
Manufacturing facilities operate under certified ISO 9001:2015 Quality Management Systems, ISO 14001:2015 Environmental Management Systems, and IATF 16949 automotive quality standards, enforcing total traceability from iron ore sourcing to final coil slitting.
We provide localized documentation support including Certificate of Origin (Form E, Form R, Form A), precise HS Code classification (e.g., HS 7210.11 / 7210.30), and custom coil weight splitting to maximize container payload efficiency and streamline destination port customs clearance.
Expert engineering answers regarding material selection, surface finishes, welding, and storage guidelines for Electro-Galvanized Coils.
Explore our comprehensive product lines including zinc-iron alloys, electrical silicon steels, hot-rolled carbon plates, and structural steel tubing.
Connect directly with our metallurgical sales engineers to specify custom coil slit widths, specific zinc coating mass options, or order mill test certificates for your project tenders.