Direct mill supply catalog offering precision-rolled carbon steel, galvannealed, and corrosion-resistant alloys engineered for high-stress industrial applications.
In modern industrial manufacturing, Hot Rolled Pickled and Oiled (HRPO) steel coils represent an essential material tier that bridges the gap between raw hot-rolled carbon steel and high-cost cold-rolled sheet. Through rigorous chemical immersion and mechanical tension levelling, HRPO steel provides an exceptional oxide-free surface finish, improved drawability, and strict thickness tolerances necessary for automated manufacturing lines.
During high-temperature hot rolling, steel slabs subjected to atmospheric oxygen form a multi-layered iron oxide mill scale consisting of Wüstite (FeO), Magnetite (Fe3O4), and Hematite (Fe2O3). This scale is brittle, non-uniform, and highly abrasive to stamping dies, welding equipment, and machine tools.
The continuous acid pickling process passes the uncoiled hot-rolled strip through a series of temperature-controlled Hydrochloric Acid (HCl) baths (concentrations between 8% to 18% at 75°C–85°C). The chemical reaction dissolves the oxide layer efficiently:
FeO + 2HCl → FeCl2 + H2O
Fe2O3 + 6HCl → 2FeCl3 + 3H2O
Following the acid descaling, the steel strip undergoes multi-stage high-pressure deionized water rinsing, chemical neutralization, and warm air drying. To prevent immediate flash rust (atmospheric re-oxidation), a controlled layer of electrostatic rust-preventative oil (typically 1.0 to 2.5 g/m² of paraffinic or synthetic oil) is uniformly applied. This protective film ensures a shelf life of at least 6 months under standard warehouse storage while acting as a pre-lubricant for subsequent stamping and roll-forming operations.
Our manufacturing units produce Hot Rolled Pickled Coils in full compliance with international standards including ASTM, EN, JIS, and GB/T. Review the comprehensive mechanical parameters and chemical compositions below.
| Standard | Grade Designation | Yield Strength (MPa) | Tensile Strength (MPa) | Elongation A5 (%) | Primary Industrial Application |
|---|---|---|---|---|---|
| EN 10111 | DD11 (StW22) | 170 – 360 | max 440 | ≥ 28 | General forming, unexposed auto brackets, hardware |
| EN 10111 | DD12 (StW23) | 170 – 320 | max 420 | ≥ 30 | Deep drawing parts, complex geometry stampings |
| EN 10111 | DD13 (StW24) | 170 – 290 | max 400 | ≥ 33 | Extra deep drawing, intricate automotive presswork |
| EN 10111 | DD14 | 170 – 270 | max 380 | ≥ 36 | Super deep drawing, challenging zero-defect stampings |
| EN 10149-2 | S355MC / S420MC | ≥ 355 / ≥ 420 | 430 – 620 | ≥ 19 | Chassis frames, heavy machinery, crane booms |
| EN 10149-2 | S700MC | ≥ 700 | 750 – 950 | ≥ 12 | Ultra-lightweight structural members, commercial vehicle chassis |
| ASTM A1011 | CS Type A / B | 170 – 310 | max 450 | ≥ 25 | Structural tubing, HVAC frames, racking systems |
| ASTM A1011 | HSLAS Grade 50/60 | ≥ 340 / ≥ 410 | ≥ 410 / ≥ 480 | ≥ 18 | Solar mounting structures, agricultural equipment |
Hot Rolled Pickled Coils eliminate the need for secondary in-house shot-blasting or acid cleaning, reducing fabricators' processing costs by 15% to 25%. Below are the primary sector-specific engineering use cases.
Used for control arms, subframes, wheel hubs, and bumper beams. The absence of scale prevents tool wear on stamping presses, ensuring seamless robotic welding and optimal cathodic electrodeposition (CED) primer adhesion.
High-strength HSLA pickled coils (S355MC / S420MC) are roll-formed into solar C/U channels and torque tubes before hot-dip galvanizing. Clean surfaces yield defect-free continuous zinc coating layers.
Pickled steel provides tight gauge uniformity and high surface purity required for hermetic compressor shells, fan scroll housings, and heavy-duty ventilation ducting flanges.
Used as raw strip feed for High-Frequency Induction (HFI) welded tubes. Absence of mill scale prevents internal weld seam contamination and ensures smooth high-speed tube rolling.
High-yield S700MC pickled plates are laser-cut and press-braked for boom sections, loader arms, and agricultural equipment frames requiring extreme structural strength with reduced deadweight.
Smooth surface quality ensures excellent powder coating finish for industrial switchgear cabinets, server racks, and automated warehouse storage beams.
The steel industry is undergoing a dual transformation driven by decarbonization targets and AI-enabled quality control. Our partner manufacturing lines are adopting next-generation pickling technologies.
Transitioning to closed-loop spray-roasting and fluid-bed HCl regeneration plants. Achieves 99.5% acid recovery efficiency, drastically reducing chemical waste while recovering high-purity iron oxide powder (Fe2O3) for soft ferrite magnets.
Deployment of high-speed optical camera arrays integrated with convolutional neural networks (CNNs). Real-time monitoring detects surface scratches, pinholes, residual scale, or oil stains at line speeds up to 300 meters per minute.
Development of hot-applied dry-film lubricants (pre-lubes) that replace liquid oil. Dry lubes eliminate oil sloshing, improve press shop cleanliness, and can be directly welded or painted without degreasing.
Expanding pickling capabilities to advanced high-strength steels (AHSS), including Complex-Phase (CP) and Dual-Phase (DP) hot-rolled grades up to 1000 MPa tensile strength for next-generation EV lightweighting.
China’s steel industry provides unprecedented supply chain integration, combining upstream iron ore processing, mega-scale blast furnaces / electric arc furnaces (EAF), continuous hot strip mills, and high-speed pickling lines within concentrated industrial hubs like Tianjin and Hebei.
With monthly processing capacities exceeding 100,000 metric tons, our integrated manufacturing lines guarantee fast order turnaround (typically 15 to 25 days) even during global supply chain disruptions.
Located near Tianjin Port—the largest comprehensive port in North China—our facility offers seamless containerized and breakbulk ocean freight options, reducing inland haulage costs and freight transit times.
Equipped with high-precision CNC slitting lines and automatic stackers, master coils can be customized into narrow slit coils (minimum width 30mm) or cut into flat rectangular sheets with zero burr tolerances.
Optimized energy utilization, automated high-yield pickling lines, and direct mill-origin sourcing provide global buyers with superior quality steel at highly competitive price points.
To meet the stringent requirements of international engineering firms, OEMs, and stockists across North America, Europe, the Middle East, and Southeast Asia, every batch of Hot Rolled Pickled Coils undergoes rigorous multi-stage quality assurance.
Our quality management systems are fully certified for automotive tier-1 and tier-2 material supply, strictly adhering to standardized metallurgical sampling and traceably documented mill operations.
Every shipment is dispatched with comprehensive 3.1 inspection certificates, detailing real heat analysis, mechanical tensile/yield testing, elongation values, and grain size verification.
We welcome third-party audit and verification from internationally recognized testing agencies, including SGS, TÜV Rheinland, Bureau Veritas (BV), and Intertek.
Coils are packed with anti-rust VCI paper, outer plastic film, radial and circumferential steel straps, metal edge protectors, and wooden pallets designed for long-distance maritime transport.
Clear, expert answers to key purchasing, metallurgical, and application questions asked by procurement managers and structural engineers.
Explore our extended inventory of coated sheets, electrical silicon coils, stainless steel, and structural pipe solutions.