Global Technical Whitepaper & Industrial Supply Chain Solutions for Precision Cold Rolled Coil, Sheet, Strip, and Advanced Metallurgy Applications
Explore our premier engineered steel catalog sourced directly from our Tianjin Industry 4.0 production base, adhering strictly to global standards including ASTM, EN, JIS, and DIN.
Cold rolled steel represents the pinnacle of flat steel processing, characterized by tight dimensional tolerances, flawless surface textures, and optimized mechanical properties through strain hardening and controlled annealing.
Unlike hot rolled steel processed above recrystallization temperatures, cold rolling occurs at ambient room temperatures. Hot-rolled pickled & oiled (HRPO) coils pass through multi-stand continuous cold reduction mills. Applying compressive stress reduces thickness by 50% to 85%, breaking down grain structures and generating high dislocation densities that enhance tensile strength and hardness.
To eliminate internal stresses caused by work hardening, reduced steel strips undergo recrystallization annealing in Continuous Annealing Lines (CAL) or Batch Annealing Furnaces (BAF) under protective hydrogen-nitrogen gas atmospheres. Precision thermal profiling allows custom tuning of grain growth, achieving superior drawability (e.g., SPCD, SPCE grades) without surface oxidation.
A final light pass through a temper mill (skin pass) eliminates yield point elongation (Lüders bands) during stamping, ensuring a smooth, non-fluting finish. It also imparts controlled roughness profiles (Roughness Average $R_a$ 0.6 µm to 1.2 µm), providing superior paint adhesion, e-coating printability, and lubricant retention for deep drawing operations.
Operating from the Tianjin steel manufacturing hub, our smart factory integrates automated gauge controls, real-time defect scanning, and direct port connectivity to deliver uncompromised quality and rapid global delivery cycles.
Our production floor features state-of-the-art 1420mm and 1700mm 5-stand tandem cold rolling mills equipped with X-ray thickness measurement sensors and electro-hydraulic Automatic Gauge Control (AGC) systems. This advanced technological integration maintains dynamic gauge variation within ±0.005mm across the entire strip length. Coupled with online Automated Surface Inspection Systems (ASIS), our mills detect micro-defects, pinholes, and edge scratches in real-time at speeds up to 1,200 meters per minute.
Located in the Jinghai Industrial Zone, Tianjin, our facility benefits from direct supply agreements with premier primary steelmakers (Baosteel, Shougang, HBIS), securing consistent, prime-grade hot rolled substrate coils. Strategic proximity to Tianjin Xingang Port—one of North China's largest maritime shipping gateways—allows seamless containerized, break-bulk, and barging logistics. Integrated warehouse management systems (WMS) facilitate Just-In-Time (JIT) dispatch, reducing lead times to overseas markets by up to 30%.
Cross-reference international cold rolled steel standards to match your engineering specifications across automotive, home appliance, electrical, and structural manufacturing sectors.
| Steel Grade Family | JIS G3141 Standard | EN 10130 / EN 10152 | ASTM Standard | Yield Strength ($R_e$, MPa) | Tensile Strength ($R_m$, MPa) | Primary Industrial Applications |
|---|---|---|---|---|---|---|
| Commercial Quality (CQ) | SPCC-SD / SPCC-SB | DC01 / FeP01 | ASTM A1008 CS Type A/B/C | 140 – 280 | 270 – 410 | General fabrication, electrical cabinets, shelving, ductwork, light posts. |
| Drawing Quality (DQ) | SPCD | DC03 / FeP03 | ASTM A1008 DS Type A/B | 140 – 240 | 270 – 370 | Automotive inner panels, appliance outer covers, light pressing. |
| Deep Drawing Quality (DDQ) | SPCE / SPCF | DC04 / FeP04 | ASTM A1008 DDS | 130 – 210 | 270 – 350 | Complex stampings, oil pans, compressor shells, deep cookware. |
| Extra Deep Drawing (EDDQ) | SPCG (IF Steel) | DC06 / Interstitial Free | ASTM A1008 EDDS | 120 – 180 | 270 – 330 | Ultra-deep complex automotive body-in-white (BIW) structures. |
| Advanced High Strength (AHSS) | SPFC590 / Dual Phase | HC330/590DP (DP590) | ASTM A1008 High Strength | 330 – 450 | ≥ 590 | Automotive crash structures, structural cross-members, safety frames. |
| Zinc-Iron Galvannealed | GA (JIS G3302) | ZF60 / ZF275 (EN 10346) | ASTM A653 A60/A40 | 140 – 300 | 270 – 420 | Spot-welded automotive frames, high-corrosion painted enclosures. |
| Electrical Non-Grain Oriented | 50A290 - 50A800 | M310-50A - M800-50A | ASTM A677 Silicon Steel | Core Loss ≤ 3.1-8.0 W/kg | B50 ≥ 1.60-1.72 T | Electric motors, EV traction rotors/stators, power generators. |
Delivering specialized cold-rolled chemistry, coating weights, and slitting profiles tailored to demanding global industry verticals.
Our ultra-clean Interstitial-Free (IF) and Dual-Phase (DP590/DP780) cold rolled coils deliver superior energy absorption and weight reduction for automotive OEMs. Combined with Galvannealed (ZF60-ZF275) zinc-iron coatings, they ensure weldability and resistance against severe environmental corrosion.
For refrigerator outer shells, washing machine drums, and air conditioner housings, our SPCC/DC01 cold rolled steel features ultra-flat flatness tolerances achieved through tension levelling. High surface purity guarantees flawless powder coating and direct enameling performance.
Supplying Cold Rolled Non-Grain Oriented (CRNGO) silicon steel coils (M310 to M800) optimized for low magnetic core loss and high permeability in electric motor laminations. For green energy, our Zn-Al-Mg (ZM/AZM 275g) coated steel sheets provide decades of maintenance-free service for solar mounting frames.
Eliminating cross-border procurement risks through standardized quality control, verifiable certification, and customized packaging engineering.
Every cold-rolled shipment is fully traceable to its original melt heat number. We issue official Mill Test Certificates in full accordance with EN 10204 3.1 or 3.2 (third-party certified by SGS, TÜV, or Bureau Veritas). Our plant operates strictly under ISO 9001:2015 quality management, ISO 14001:2015 environmental standards, and automotive-grade IATF 16949 systems. All materials comply with European RoHS and REACH environmental mandates.
Preventing white rust, moisture ingress, and transit denting is paramount during transoceanic shipping. We utilize premium heavy-duty export packaging protocols:
Pioneering green steel decarbonization, ultra-thin precision rolling, and AI-driven predictive metallurgy for next-generation global industries.
Aligning with global net-zero targets, our mill roadmap incorporates Hydrogen-based Direct Reduced Iron (DRI) paired with Electric Arc Furnaces (EAF). This process reduces carbon footprints by up to 60% to 80%, delivering eco-certified cold-rolled strip to automotive and European building markets.
Demand for high-efficiency electric motors and lightweight electronics is driving cold reduction down to ultra-thin gauges (<0.15mm). Advanced multi-roll Sendzimir mills deliver extreme gauge uniformity, essential for ultra-low-loss electrical steel laminations.
Integrating neural-network models into continuous annealing and temper rolling lines allows real-time prediction of grain size and mechanical properties. Simultaneously, next-generation Zinc-Aluminum-Magnesium-Silicon self-healing alloy coatings ensure cut-edge corrosion resistance in aggressive environments.
Expert answers to common engineering, metallurgical, and supply chain inquiries from global steel buyers and fabricators.
Under Japanese standard JIS G3141, SPCC is Commercial Quality steel intended for basic bending and forming; SPCD is Drawing Quality with lower carbon content and higher elongation for light drawing; SPCE is Deep Drawing Quality (often Interstitial-Free steel) formulated for complex automotive or appliance stampings requiring extreme drawability without tearing or wrinkling.
Galvannealed steel undergoes an inline post-dip heat treatment (annealing at ~500°C–550°C) immediately after zinc coating. This induces iron diffusion from the steel substrate into the zinc layer, forming a matte-gray zinc-iron alloy coating (~9–12% Fe). This microstructure eliminates the free-zinc spangle, providing superior spot weldability, exceptional paint adhesion, and enhanced scratch resistance compared to standard GI.
Surface roughness ($R_a$, measured in micrometers) determines paint coating appearance and lubricant retention during press forming. A matte finish ($R_a$ 0.6 µm to 1.2 µm) traps drawing lubricants to prevent die scoring and ensures optimal adhesion for electro-deposition (E-coat) paint systems. Bright finishes ($R_a$ < 0.4 µm) are specified for decorative electroplating applications.
Cold Rolled Non-Grain Oriented (CRNGO) silicon steel is an iron-silicon alloy containing 1.0% to 3.5% silicon with isotropic magnetic properties in all rolling directions. It is engineered to minimize core loss (watt loss/kg) and eddy currents in rotating magnetic fields, making it the premier core material for electric motor stators/rotors, hermetic compressors, and power generators.
Our precision rotary slitting lines can process cold rolled coils from 0.15mm to 3.0mm thickness, slitting down to narrow strip widths as small as 15mm with width tolerances maintained within ±0.10mm. Burr height is kept strictly under 5% of material thickness to prevent die jamming during high-speed automated stamping.
Annealed low-carbon steel exhibits a sharp yield point that causes localized discontinuous yield elongation (stretcher strain) during uncoiling or drawing. Temper rolling (skin passing with 0.5% to 2.0% cold reduction) introduces a controlled density of mobile dislocations that locks yield point elongation, ensuring a completely smooth surface appearance during subsequent deep drawing.
Complementing our flat-rolled steel strip and coil catalog with heavy-gauge plates, seamless structural pipes, and specialized alloy coatings.