Explore our primary structural steel grades, precision coils, and coated steel plates engineered to international standards.
In modern industrial engineering, 3.0mm Hot Rolled (HR) carbon steel plates represent a critical structural gauge bridging sheet metal fabrication and structural steelwork. Manufactured through high-temperature continuous rolling processes above the recrystallization threshold (typically exceeding 1,100°C), 3.0mm HR plates exhibit exceptional ductility, yield stability, and cost efficiency for structural, automotive, and heavy machinery applications.
As a leading Chinese manufacturer and global supplier, our production lines utilize advanced Continuous Casting and Hot Strip Mill (HSM) technologies equipped with Hydraulic Automatic Gauge Control (AGC). This ensures that every sheet achieves optimal mechanical uniformity, minimal residual internal stress, and precise dimensional compliance matching global standards including ASTM, EN, JIS, and GB.
The performance of 3.0mm hot rolled plate hinges on exact melt chemistry. By strictly limiting harmful impurities such as Sulfur (S) and Phosphorus (P), and precisely balancing Carbon (C) and Manganese (Mn) ratios, our HR plates achieve superior weldability and cold-forming capabilities.
| Steel Grade Standard | C (Carbon) Max | Mn (Manganese) | Si (Silicon) Max | P (Phosphorus) Max | S (Sulfur) Max | Carbon Equivalent (CEV) |
|---|---|---|---|---|---|---|
| Q235B (GB/T 700) | 0.20% | 0.35 - 0.80% | 0.35% | 0.045% | 0.045% | ≤ 0.35% |
| Q345B / S355JR (EN 10025-2) | 0.20% | 1.00 - 1.60% | 0.55% | 0.035% | 0.035% | ≤ 0.44% |
| SS400 (JIS G3101) | - | - | - | 0.050% | 0.050% | ≤ 0.40% |
| ASTM A36 | 0.26% | - | 0.40% | 0.040% | 0.050% | ≤ 0.40% |
| S235JR (EN 10025-2) | 0.17% | ≤ 1.40% | - | 0.035% | 0.035% | ≤ 0.35% |
Mechanical resilience defines the load-bearing capacity of 3.0mm steel plates in structural frames, stamping operations, and chassis manufacturing. Below is the technical baseline for fully annealed/normalized 3.0mm hot rolled sheet products.
| Grade Designation | Yield Strength ReH (MPa) Min | Tensile Strength Rm (MPa) | Elongation A80 (%) Min | Charpy V-Notch Impact (J) | Cold Bending (180° Inner Radius) |
|---|---|---|---|---|---|
| Q195 / S185 | ≥ 195 | 315 - 430 | ≥ 33 | N/A | d = 0.5a (Flawless) |
| Q235B / S235JR | ≥ 235 | 360 - 510 | ≥ 26 | ≥ 27J (at +20°C) | d = 1.0a (Flawless) |
| Q345B / S355JR | ≥ 345 | 470 - 630 | ≥ 21 | ≥ 27J (at +20°C) | d = 2.0a (Flawless) |
| ASTM A36 | ≥ 250 | 400 - 550 | ≥ 23 | Optional upon request | d = 1.5a (Flawless) |
Our hydraulic AGC system guarantees a tight thickness variance within ±0.12mm on 3.0mm continuous strip, eliminating thin-spots that compromise laser cutting and automatic robotic welding lines.
Using online skin-pass rolling mills and 11-roll precision tension levelers, our 3.0mm HR plates maintain a flatness deviation under 3mm/m, preventing spring-back during cold forming and bending.
Supplied in Black As-Rolled condition (with light protective oxide scale) or Pickled & Oiled (P&O) surface finish suitable for immediate painting, powder coating, or electroplating without shot-blasting.
China’s steel sector leads world-class metallurgical processing. Our manufacturing hub leverages fully integrated supply chains, automated mill controls, and port proximity to deliver unmatched delivery speed and cost resilience.
By combining precise deformation temperature control in the roughing and finishing mills with ultra-fast laminar water cooling, our 3.0mm plates feature fine ferrite-pearlite grain structures without requiring expensive post-rolling heat treatment alloy additives.
Direct partnerships with major domestic steelmakers (such as Baosteel, HBIS, and Shougang) ensure consistent continuous-casting billet quality. Our mill operates eight high-frequency lines producing up to 100,000 metric tons monthly.
Situated in Jinghai, Tianjin, our production park sits less than 70 kilometers from Tianjin Port (Xingang). This strategic location slashes inland freight costs and allows seamless containerized or bulk vessel shipping with 7 to 14 days lead time for standard stock orders.
The 3.0mm thickness is universally versatile. From structural framing in Europe to solar mount structures in South America, engineered hot rolled steel plates fulfill demanding structural roles.
Utilized extensively in cross-members, truck chassis stiffeners, brake backing plates, and suspension brackets. The 3.0mm gauge provides necessary yield resistance against road dynamic shock loads while permitting deep-drawing operations when using SAPH440 / Q345 Pickled & Oiled stock.
In utility-scale solar installations across the Middle East, Southeast Asia, and Australia, 3.0mm HR plates are roll-formed into C/U channels, pile posts, and torque tubes. When hot-dip galvanized or converted into Zinc-Aluminum-Magnesium (ZM) alloy plates, they provide 25+ years of atmospheric corrosion resistance.
3.0mm hot rolled steel forms the backbone of ISO shipping container structural cross-members, corrugated side walls, and heavy-duty industrial toolbox enclosures. It guarantees structural rigidity under heavy forklift axle loads during loading and unloading.
Plow frames, harvester shrouds, tractor brackets, and grain bin support channels rely on 3.0mm Q235B/Q345B hot rolled plates. Excellent abrasion resistance combined with high weldability ensures fast field repairs and structural integrity under cyclic fatigue.
Used in high-pressure industrial dust extraction systems, boiler casings, and large-diameter spiral/longitudinal welded ventilation pipes where standard thin gauge sheet metal (<1.5mm) lacks torsional resistance against pressure surges.
Cold-formed Z-purlins and C-purlins produced from 3.0mm high-strength S355JR/Q345B steel plates enable wide-span industrial warehouse roofs without intermediate columns, optimizing structural weight and material costs.
The global steel market is rapidly shifting toward lightweighting, extreme yield strength, and low-carbon production methods. Our R&D engineering division is actively advancing the following metallurgical breakthroughs:
By replacing traditional 4.0mm Q235B plates with high-yield 3.0mm S700MC / Q690D HSLA steel, clients achieve up to 25% structural weight reduction while maintaining load-bearing capacity in commercial trailers and cranes.
In response to the EU Carbon Border Adjustment Mechanism (CBAM), our mill is transitioning toward Electric Arc Furnace (EAF) melting fueled by scrap steel and hydrogen-based Direct Reduced Iron (DRI), lowering scope 1 & 2 carbon intensity below 0.8 t CO2/t steel.
Integrating 3D laser scanners across our continuous shearing lines allows real-time monitoring of strip crown, wedge, and edge drop. Non-conforming sections are automatically cut out, ensuring 100% defect-free delivery.
Understanding regional procurement frameworks ensures seamless cross-border transactions and regulatory compliance.
| Target Region | Primary Demand Drivers | Dominant Specification Standard | Compliance & Trade Considerations |
|---|---|---|---|
| European Union (EU) | Renewable solar mounts, structural steel, machinery frames | EN 10025-2 S235JR / S355JR; EN 10051 | CE Marking (EN 1090), ISO 9001, CBAM carbon emissions report compliance |
| North America | Building construction purlins, agricultural trailers, pipe manufacturing | ASTM A36, ASTM A1011 SS Grade 36 / 50 | Mill Test Certificate (MTC) to EN 10204 3.1, strict gauge tolerance verification |
| Southeast Asia (ASEAN) | Infrastructure projects, shipbuilding, warehouse rack structures | JIS G3101 SS400, GB/T 700 Q235B / Q345B | SNI certification (Indonesia), SIRIM (Malaysia), competitive bulk shipping rates |
| Middle East & Africa | Solar tracking structures, water storage tank fabrication | S355JR, Q235B, Hot-Dip Galvanized / ZM Coated | SASO (Saudi Arabia), COC / SABER compliance, seaworthy protective packaging |
Every metric ton of 3.0mm HR steel plate shipped from our facilities undergoes stringent quality verification. We mitigate procurement risk for overseas importers through transparent testing and direct engineering support.
Issued with every shipment, detailing exact heat number traceabilities, ladled chemical analysis, yield point, tensile strength, elongation, and Charpy impact energy values.
We fully support independent third-party quality inspections on site by international agencies such as SGS, BV (Bureau Veritas), Intertek, or Lloyd’s Register prior to port loading.
Plates are bundled with anti-corrosion VCI paper, heavy steel strapping, corner edge protectors, and wooden skids to prevent moisture ingress and mechanical damage during ocean transit.
Clear engineering answers to critical questions regarding 3.0mm hot rolled plate procurement, processing, and application.
Explore additional structural, coated, and specialty tubular products manufactured within our Tianjin steel production ecosystem.