The alloy coating of galvanized aluminum magnesium steel plate is made of zinc (Zn), aluminum (Al), and magnesium (Mg) after high temperature curing to form a dense ternary eutectic structure. This allows the surface of the steel plate to form a layer of dense, effective corrosion prevention super coating.
The 275g/M2 Zinc-aluminum-magnesium alloy plating plate produced by our factory can be guaranteed not to appear red rust in 30 years under normal processing and use conditions. According to the characteristics of Zinc-aluminum-magnesium, it can completely replace hot dip galvanized products and the use of part of stainless steel.
| Products Name | Aluminum plated magnesium zinc coated steel plate |
| Standard | EN10147, EN10142, DIN 17162, JIS G3302, ASTM A653 |
| Steel Grade | DC51D, SGC340D, SGC440D, S250GD, S280GD, S320GD, S350GD, S400GD, S420GD or customer's requirement |
| Thickness | 0.8 - 5mm |
| Width | 900 - 1500mm |
| Coils ID | 508mm / 610mm |
| Coating Weight | ZMA80 - 650 (g/m² / two sides) |
| Coil Weight | 3 - 20 metric ton per coil |
| Surface Treatment | Passivation (C), Oiling (O), Lacquer sealing (L), Phosphating (P), Untreated (U) |
| Surface Structure | Normal spangle coating (NS), Minimized spangle coating (MS), Spangle-free (FS) |
| Package | Water proof paper is inner packing, galvanized steel or coated steel sheet is outer packing, side guard plate, then wrapped by seven steel belts. Or according to customer's requirement. |
Corrosion resistance, self-repair, environmental protection, long life, easy processing. The alloy coating forms a dense ternary eutectic structure, creating an effective super corrosion prevention layer.
In the case of the same coating, the corrosion resistance is 5-10 times that of the ordinary hot dip galvanized steel plate.
The cutting end face and punching incisions dissolve over time, forming a dense protective film composed of zinc hydroxide, acid zinc chloride, and magnesium hydroxide to inhibit section corrosion.
Because the coating is dense, smooth, and 2.5 times harder than ordinary galvanized steel, it offers excellent tensile, stamping, bending, welding properties, scratch resistance, and wear resistance.
The surface treatment does not contain hexavalent chromium or other heavy metal ions. It complies with international environmental protection standards (ROHS) and is highly favored globally.
The coating is made of zinc (Zn), aluminum (Al), and magnesium (Mg), which are cured at high temperatures to form a highly dense and effective corrosion-preventing ternary eutectic structure.
Our 275g/m² Zinc-aluminum-magnesium alloy plating plate is guaranteed not to develop red rust for 30 years under normal processing and use conditions.
Yes, due to its exceptional corrosion resistance and durability, it can completely replace hot dip galvanized products and act as a substitute for stainless steel in many applications.
Over time, the coating around cuts and punching incisions dissolves to form a dense protective film of zinc hydroxide, acid zinc chloride, and magnesium hydroxide, which effectively inhibits further section corrosion.
Absolutely. The surface treatment is free of hexavalent chromium and other harmful heavy metals, fully complying with international RoHS environmental protection standards.