The alloy coating of galvanized aluminum magnesium steel plate is made of zinc (Zn), aluminum (Al), magnesium (Mg) after high temperature curing to form a dense ternary eutectic structure, so that the surface of the steel plate to form a layer of dense, effective corrosion prevention super coating.
The 275g/M2 Zinc-aluminum-magnesium alloy plating plate produced by our factory can be guaranteed not to appear red rust in 30 years under normal processing and use conditions. According to the characteristics of Zinc-aluminum-magnesium, it can completely replace hot dip galvanized products and the use of part of stainless steel.
| Products name | Aluminum plated magnesium zinc coated steel plate |
| Standard | EN10147, EN10142, DIN 17162, JIS G3302, ASTM A653 |
| Steel Grade | DC51D, SGC340D, SGC440D, S250GD, S280GD, S320GD, S350GD, S400GD, S420GD or customer's requirement |
| Thickness | 0.8-5mm |
| Width | 900-1500mm |
| Coils ID | 508mm / 610mm |
| Coating weight/g/m2/two sides | ZMA80-650 |
| Coil Weight | 3-20 metric ton per coil |
| Surface Treatment | Passivation(C), Oiling(O), Lacquer sealing(L), Phosphating(P), Untreated(U) |
| Surface Structure | Normal spangle coating(NS), minimized spangle coating(MS), spangle-free(FS) |
| Package | Water proof paper is inner packing, galvanized steel or coated steel sheet is outer packing, side guard plate, then wrapped by seven steel belt. Or according to customer's requirement. |
Corrosion resistance, self-repair, environmental protection, long life, easy processing.
The alloy coating of galvanized aluminum magnesium steel plate is made of zinc (Zn), aluminum (Al), magnesium (Mg) after high temperature curing to form a dense ternary eutectic structure, so that the surface of the steel plate to form a layer of dense, effective corrosion prevention super coating.
In the case of the same coating, it is 5-10 times that of the ordinary hot dip galvanized steel plate.
The cutting end face of Zinc-aluminum-magnesium steel plate and around the punching incision will be dissolved with the passage of time, forming a dense protective film composed of zinc hydroxide, acid zinc chloride and magnesium hydroxide. This protective film has low electrical conductivity and has an obvious inhibitory effect on the corrosion of the section.
Because zinc, aluminum and magnesium coating is very dense, smooth, and the coating surface hardness is 2.5 times that of ordinary galvanized steel, it has excellent tensile, stamping, bending, welding and other processing properties, as well as excellent scratch resistance and wear resistance.
Zinc, aluminum and magnesium surface treatment does not contain hexavalent chromium and other heavy metal ions. It is in line with international environmental protection standards (ROHS) and is currently an internationally recognized environmental product.
The 275g/M2 Zinc-aluminum-magnesium alloy plating plate produced by our factory can be guaranteed not to appear red rust in 30 years under normal processing and use conditions. According to the characteristics of Zinc-aluminum-magnesium, it can completely replace hot dip galvanized products and the use of part of stainless steel.