Mill-direct high-performance steel products engineered for high heat resistance, precision forming, and severe atmospheric exposure.
Aluminum-Silicon (AS) coated steel—commonly designated as Type 1 Aluminized Steel or AS Coating—represents a pinnacle of continuous hot-dip surface engineering. By combining cold-rolled or hot-rolled steel substrates with an alloy coating consisting of approximately 88% to 91% Aluminum (Al) and 9% to 11% Silicon (Si), metallurgical engineers have solved one of industrial manufacturing's greatest dilemmas: maintaining high-temperature heat reflectivity and oxidation resistance while preventing the brittle iron-aluminum intermetallic alloy phase from cracking during aggressive deep drawing and roll forming.
The addition of 9-11% silicon is the fundamental differentiator of AS coated steel compared to pure aluminum coatings (Type 2). Silicon controls and restricts the growth of the brittle Fe-Al intermetallic layer at the boundary interface during the molten dip bath process. This yields an extraordinarily thin, ductile intermetallic bonding layer (typically under 2 to 3 microns), enabling complex mechanical stamping into severe draw-grade components such as industrial baking pans, automotive heat shields, and HVAC heat exchangers without micro-flaking or delamination.
| Performance Criterion | Aluminum-Silicon Coated (AS Type 1) | Galvanized Steel (GI - 100% Zn) | Galvalume Steel (GL - 55% Al-Zn) | Stainless Steel (Ferritic 409/430) |
|---|---|---|---|---|
| Continuous Temperature Limit | Up to 650°C (1202°F) | 200°C (392°F) max | 315°C (600°F) max | 650°C - 815°C |
| Thermal Reflectivity (Under 450°C) | Extremely High (~80-90%) | Moderate (~30-50%) | High (~65-75%) | Low to Moderate (~40%) |
| Barrier Protection Against Heat Scaling | Superior (Forms Al₂O₃ passive film) | Poor (Zinc oxidizes & vaporizes) | Moderate (Micro-cracking under thermal stress) | Excellent |
| Deep Drawing & Formability | Exceptional (DX53D+AS / DX54D+AS) | Excellent | Moderate (Brittle alloy layer) | Requires High Tonnage & Tooling Wear |
| Cost Efficiency / Price Ratio | Highly Economical Replacement for Stainless | Lowest Initial Cost | Moderate Cost | High Capital Expenditure |
Understanding exact material designations ensures optimal mechanical performance during stamping, bending, and roll forming operations.
Specifies continuously hot-dip coated steel flat products. Common designations include:
Covers steel sheet, cold-rolled, aluminum-coated by the hot-dip process:
Specifies hot-dip aluminum-coated steel sheets and coils:
AS coated steel provides targeted physical properties tailored to demanding end-use environments across modern manufacturing sectors.
DX53D+AS and DX54D+AS coils are the premier material choice for high-volume commercial bread pans, hamburger bun trays, and cake molds. The non-toxic Al-Si layer complies with international FDA and EU food contact regulations while providing continuous thermal stability during thousands of baking cycles without flaking rust or degrading thermal conductivity.
Under-car environments demand resistance to exhaust gases (containing SO₂, CO₂, and moisture) alongside thermal spikes exceeding 500°C. AS coated steel is extensively fabricated into exhaust mufflers, catalytic converter heat shields, manifold covers, and engine bay heat barriers, offering significant weight savings and cost advantages over 409 stainless steel.
Residential furnaces, industrial boiler casing liners, heat exchangers, and HVAC ducting require components that remain unoxidized under combustion gas exposure. The self-passivating Al₂O₃ oxide layer formed on AS steel under elevated temperatures stops corrosive scaling and prolongs equipment operational life.
Microwave interior cavities, electric oven heating chambers, toaster housings, and commercial deep fryer covers leverage AS steel's high thermal reflectivity (reflecting over 80% of infrared heat energy), reducing energy consumption and maintaining sleek aesthetic surface integrity.
Agricultural grain dryers, solar collector backing plates, and chemical storage vessels exposed to combined solar thermal radiation and atmospheric pollutants utilize AS steel for superior exterior durability compared to standard zinc coatings.
Leveraging Tianjin's world-class metallurgical infrastructure, advanced continuous hot-dip coating lines, and integrated logistics hubs.
Procuring wholesale Aluminum-Silicon coated steel coils and sheets directly from established Chinese manufacturers unlocks unmatched structural efficiency and cost optimization. Modern Chinese steel facilities feature state-of-the-art continuous hot-dip aluminizing lines equipped with automated air-knife coating weight gauges, tension leveling, and online surface flaw detection systems.
Direct partnership with tier-1 substrate suppliers (Baosteel, Shougang, HBIS) ensures ultra-clean hot and cold rolled strip steel, free from non-metallic inclusions, ensuring high yield strength consistency and superior drawability.
Equipped with high-precision slitting machines capable of processing narrow strips down to 30mm width, slitted edges with minimal burr (<0.02mm), custom cut-to-length sheet processing, and paper-interleaved packing to protect pristine surface finishes.
Comprehensive in-factory laboratories conduct rigorous batch testing: Magnetic Coating Thickness Measurement, Triple-Spot Coating Mass Verification, Salt Spray Resistance Testing (SST > 500 hrs), Cup Drawing Tests (Erichsen), and High-Temperature Muffle Furnace Baking Tests.
Streamlining cross-border supply chain risks through comprehensive regulatory compliance, custom packaging, and flexible trade arrangements.
As international environmental legislation expands, such as the European Union's Carbon Border Adjustment Mechanism (CBAM), our partner mills utilize scrap-augmented EAF (Electric Arc Furnace) and energy-efficient continuous annealing processes. Detailed EPD (Environmental Product Declaration) dossiers and carbon footprint calculations are made available to support enterprise ESG reporting.
International sea transport requires robust protection against salt air and humidity. All AS steel coils receive 360-degree protection: VCI anti-rust film, heavy-duty waterproof craft paper, inner and outer steel corner protectors, galvanized metal circumferential bands, and wooden/steel pallets designed for safe container or breakbulk loading.
We provide localized engineering support including small trial order processing (MOQ from 5-10 metric tons for standard sizes), mill test certificates (EN 10204 3.1 / 3.2), third-party independent inspections (SGS, BV, Intertek), and flexible payment terms (LC 30/60/90 days, TT, DP).
Expert technical answers addressing critical B2B procurement queries regarding AS coated steel specifications, processing, and application performance.
Explore our extended catalog of specialty coated coils, structural tubes, and precision engineering materials.