Explore our tier-1 direct mill supply inventory covering electrical silicon steel, hot-dipped galvanized sheets, structural ERW tubes, and specialty alloy coated coils engineered for demanding industrial specifications.
Engineered for low core loss, superior magnetic permeability, and optimal punching durability across high-volume motor stator and rotor lamination stamping operations.
In modern electrical engineering and global industrial procurement, 50SW800 silicon steel coil represents one of the most widely specified grades of cold-rolled non-grain-oriented electrical steel (CRNGO). Designed specifically for rotating electrical machinery, static magnetic circuits, and power conversion devices, 50SW800 combines reliable electromagnetic performance with high mechanical precision and cost-effective manufacturability.
To achieve this specific electromagnetic profile, 50SW800 is produced through precise ladle metallurgy, secondary refining, continuous casting, hot rolling, cold tandem rolling, and continuous decarburization annealing. The silicon addition typically ranges between 1.2% and 1.8% by weight, supplemented with controlled fractions of aluminum ($Al$) and manganese ($Mn$). Silicon increases the electrical resistivity of the iron matrix (lowering eddy current losses), while decreasing magnetic anisotropy so that magnetic flux flows uniformly in all planar directions.
Hysteresis loss ($P_h$) occurs as magnetic domain walls shift repeatedly back and forth during alternating AC magnetization cycles. By controlling grain growth during continuous annealing and eliminating interstitial impurities like carbon ($C < 0.005\%$), nitrogen ($N$), and sulfur ($S$), 50SW800 minimizes domain wall pinning, reducing energy dissipation as waste heat.
Eddy current loss ($P_e$) is proportional to the square of sheet thickness ($d^2$) and operating frequency ($f^2$). The precise 0.50 mm gauge of 50SW800 provides an optimal technical compromise between suppressing circulating micro-currents and maintaining structural rigidity required for high-speed progressive die stamping.
Procurement directors and electrical designers must frequently map Chinese mill designations against European (EN 10126), Japanese (JIS C2552), and American (ASTM A677) standards. Below is a comprehensive cross-reference chart for technical evaluation.
| Standard Designation | Nominal Gauge (mm) | Max Core Loss $P_{1.5/50}$ (W/kg) | Min Magnetic Flux $B_{50}$ (Tesla) | Silicon + Al Content (%) | Typical Applications |
|---|---|---|---|---|---|
| 50SW800 (China / Baosteel) | 0.50 | 7.50 – 8.00 | 1.69 – 1.72 | 1.3% – 1.7% | General Motors, Compressors, Ballasts |
| M800-50A (EN 10126) | 0.50 | 8.00 | 1.68 | ~1.4% | Standard Efficiency Industrial Drives |
| 50A800 (JIS C2552) | 0.50 | 8.00 | 1.70 | ~1.5% | Domestic Appliance Motors, Pumps |
| 47F450 (ASTM A677 Approx.) | 0.47 / 0.50 | 8.10 | 1.67 | ~1.3% | Fractional Horsepower (FHP) Motors |
| 50SW600 (High-Efficiency Grade) | 0.50 | 5.60 – 6.00 | 1.67 | ~2.2% | IE3 Premium Efficiency Motors |
| 35SW300 (Ultra-Low Loss Grade) | 0.35 | 2.80 – 3.00 | 1.62 | ~3.0% | High-Frequency EV Motors & Inverters |
The global market for wholesale electrical steel coils is undergoing a structural transition driven by strict international efficiency standards, rapid industrial electrification, and net-zero carbon goals.
Global regulations—such as the EU Ecodesign Directive (EU 2019/1781) and China's GB 18613-2020 standard—require mandatory transition to IE3 and IE4 efficiency motor classes. This compels manufacturers to migrate from lower grade steel (e.g., 50SW1000 or cold-rolled carbon steel) toward tightly controlled 50SW800 and 50SW600 laminations to reduce no-load motor losses.
The global shift toward variable-frequency inverter air conditioners and heat pumps demands compressor motors that operate reliably over variable speed ranges (15 Hz to 120 Hz). 50SW800 offers the ideal balance of magnetic induction and mechanical yield strength to handle variable centripetal stresses without loss of magnetic domain alignment.
Environmental compliance (RoHS, REACH) has phased out traditional hexavalent chromate passivations. Modern 50SW800 coils are supplied with organic, inorganic, or semi-organic chromate-free insulation coatings (such as C-3, C-5, and self-bonding varnishes) that enhance interlaminar electrical resistance while ensuring zero hazardous chemical off-gassing.
Sourcing wholesale 50SW800 electrical steel coils directly from top-tier Chinese manufacturing ecosystems provides international buyers with unmatched scale, cost efficiency, and technical precision.
Modern 1450mm and 1700mm 5-stand cold tandem rolling mills equipped with Automatic Gauge Control (AGC) guarantee ultra-tight gauge tolerances within ±0.005 mm across the entire length of a 20-ton coil.
Continuous Annealing and Coating Lines (CACL) utilize pure hydrogen ($H_2$) and nitrogen ($N_2$) protective atmospheres to achieve complete decarburization ($C \le 0.003\%$) and optimal recrystallized ferrite grain size.
Laser thickness gauge scanners and inline eddy-current flaw detectors inspect 100% of the coil surface, identifying inclusions, pinholes, and edge burrs in real time prior to final coil slitting and wrapping.
Located near major ocean hubs (Tianjin Port, Shanghai Port, Qingdao Port), integrated mills offer automated slitting, customized coil weights (2 to 10 metric tons), and ocean-safe anti-rust VCI packaging for reliable international transport.
50SW800 electrical steel is universally adopted across commercial, industrial, and residential electrical equipment. Below are key engineering applications and their specific performance demands.
Hermetic motors operate continuously enclosed within refrigerant gas and lubricating oil environments. 50SW800 laminations coated with semi-organic C-5 insulation resist chemical degradation from synthetic ester/PAG oils and alternative refrigerants (R32, R290, R134a) while ensuring low thermal dissipation during sustained summer loads.
Centrifugal water pumps, agricultural irrigation drives, and factory exhaust fans require high continuous torque and steady-state magnetic flux. 50SW800 provides a high magnetic saturation induction ($B_{50} \ge 1.69\text{ T}$), enabling motor designers to achieve high magnetic flux density without saturating the stator teeth.
Washing machine induction motors, range hood extractors, ceiling fans, and power tools rely on cost-optimized 50SW800 coils. Excellent flatness and minimal residual stress ensure clean punching of intricate slot geometries with minimal tool wear on high-speed carbide progressive dies.
For small step-down transformers, voltage stabilizers, lighting ballasts, and arc welder reactor cores operating at 50/60 Hz, non-oriented 50SW800 steel serves as a cost-effective alternative to grain-oriented (CRGO) grades, providing dependable energy conversion at lower core cost.
When issuing Request for Quotations (RFQs) to China 50SW800 wholesale suppliers and factories, global procurement officers should verify the following core quality benchmarks to prevent line downtime and product warranty claims.
Excessive edge burrs during coil slitting cause short circuits across lamination stacks, increasing eddy current losses. Specify maximum burr height $\le 0.015\text{ mm}$ ($15\,\mu\text{m}$) on purchase contracts.
Ensure surface coating insulation resistance meets $\ge 20\,\Omega\cdot\text{cm}^2/\text{lamination}$ under ASTM A717 test procedures to prevent micro-shorting under mechanical stack pressure.
Require EN 10204 3.1 Mill Test Certificates detailing Epstein frame core loss testing ($P_{1.5/50}$), magnetic induction ($B_{50}$), exact gauge tolerance, chemical heat analysis, and stacking factor value.
Detailed technical and commercial answers addressing common engineering inquiries, slitting preferences, coating choices, and overseas shipping logistics.
Partner directly with leading Chinese electrical steel manufacturing mills and slitting centers. Obtain instant mill test reports, slitting options, custom coil weights, and competitive CIF/FOB pricing for your factory destination.
Contact Our Export Engineering TeamBrowse additional high-demand steel categories from our factory network, including electrical silicon coils, galvalume sheets, hollow structural sections, and specialized hardware materials.