High-precision manufactured steel coils, pipes, and structural components tailored for international engineering standards and rigorous industrial deployments.
In contemporary industrial coil coating technology, 45g Alu Zinc Coils (AZ45 / Galvalume / Galfan variants) represent a highly engineered balance between raw material mass optimization, superior barrier corrosion resistance, and economical manufacturing scalability. Sourced directly from premier Chinese mill facilities, AZ45 coating specifications utilize a nominal coating mass of 45 grams per square meter (triple-spot total both sides), yielding approximately 22.5g/m² per side.
The metallurgical microstructure of 45g Alu-Zinc consists of a nominal 55% Aluminum, 43.4% Zinc, and 1.6% Silicon alloy layer. The inclusion of Silicon is not merely additive; it acts as a critical kinetic buffer to control the exothermic intermetallic reaction between molten aluminum and the ferrous cold-rolled steel base, maintaining interfacial layer thickness below 1 micron for exceptional ductility during roll-forming.
During rapid solidification on the continuous galvanizing line (CGL), the coating segregates into a dual-phase structure: an intricate dendritic network of aluminum-rich primary phase (over 80% Al) providing high-temperature oxidation resistance, surrounded by inter-dendritic zinc-rich regions that deliver sacrificial cathodic protection to vulnerable edges and scratches.
Due to the low alloy density of 55% Al-Zn (approx. 3.75 g/cm³ compared to pure zinc at 7.14 g/cm³), a 45g/m² coating weight provides an effective protective film thickness of roughly 12.0 microns total (6.0 µm per side). This lightweight profile provides equivalent barrier protection to traditional hot-dip galvanized steel with nearly double the coating mass (Z100-Z140).
Quantitative laboratory testing under ASTM B117 salt spray fog and ISO 9227 cyclic atmospheric conditions highlights the clear performance advantages of 45g/m² Alu-Zinc over standard electro-galvanized and hot-dip galvanized substrates.
| Coating Specification | Nominal Alloy Composition | Coating Weight (Both Sides) | Single Side Film Thickness | ASTM B117 Red Rust Resistance | Formability / Bend Radius |
|---|---|---|---|---|---|
| Alu-Zinc AZ45 (Galvalume) | 55% Al, 43.4% Zn, 1.6% Si | 45 g/m² | ~6.0 µm | 1,200 - 1,500 Hours | 0T - 2T (Excellent) |
| Galvanized Z100 (GI) | 99% Pure Zinc | 100 g/m² | ~7.0 µm | 400 - 600 Hours | 1T - 3T (Standard) |
| Galvanized Z275 (GI Heavy) | 99% Pure Zinc | 275 g/m² | ~19.5 µm | 1,000 - 1,200 Hours | 2T - 4T (Moderate) |
| Galfan ZA120 | 95% Zn, 5% Al, Mischmetal | 120 g/m² | ~8.5 µm | 1,000 - 1,300 Hours | 0T - 1T (Superior) |
| Electro-Galvanized EG (SECC) | Pure Electrolytic Zinc | 20 g/m² | ~1.4 µm | 72 - 120 Hours | 0T (Exceptional) |
Wholesale 45g Alu-Zinc Coils are produced on advanced continuous galvanizing lines (CGL) utilizing modern automated thickness gauge feedback and inert gas knife controls.
High-purity SPCC/CQ steel strip passes through electrolytic degreasing and pre-heating sections to eliminate oil residues and surface oxides.
Strips are recrystallized inside a radiant-tube furnace under a high-pressure Hydrogen-Nitrogen ($H_2/N_2$) reducing atmosphere at 780°C–850°C.
The strip enters the 55% Al-Zn pot at precise entry temperature. Interfacial Fe-Al-Zn-Si bonding layer forms instantly across both surfaces.
High-velocity $N_2$ gas knives continuously trim the molten alloy film to guarantee exact 45g/m² coating mass ($\pm 2g/m²$ tolerance across the width).
Forced air towers solidify the microscopic dendrite grains, creating a fine regular spangle or smooth zero-spangle surface morphology.
Four-high temper rolling removes yield point elongation, flattens strip shape, and imparts specified surface roughness for downstream painting.
Chromate-free eco-passivation or Anti-Fingerprint (AFP) organic acrylic resin coating is applied to prevent wet-storage stain (white rust).
Online thickness meters, optical defect detection systems, and automated tension recoilers yield mill-defect-free coils for export packaging.
Procuring 45g Alu Zinc steel coils directly from Tier-1 Chinese manufacturers allows global buyers to leverage upstream raw coil integration, competitive energy dynamics, and streamlined maritime logistics.
By eliminating intermediary trading markups and connecting foreign importers directly to state-of-the-art galvanizing complexes in Hebei, Shandong, and Tianjin, procurement managers achieve substantial unit cost savings without sacrificing mill test traceability (MTC EN 10204 3.1 compliance).
Standard mill production coil widths (1000mm, 1200mm, 1219mm, 1250mm) can be slit in-house into narrow strips down to 30mm for automated tube forming or roll-forming purlin lines. Thickness tolerances are maintained strictly within $\pm 0.02mm$ per EN 10143 and ASTM A924 specifications.
To survive multi-week transoceanic sea transit across variable humidity zones, coils receive heavy-duty VCI anti-rust paper wrapping, galvanized inner/outer steel edge guards, 4 radial and 3 circumferential high-tensile steel straps, mounted securely on eye-vertical or eye-horizontal wooden skids.
Global architectural codes and industrial OEM standards are rapidly pivoting away from heavy-gauge pure zinc coatings toward high-efficiency aluminum-zinc alloy formulations driven by sustainability mandates and raw material efficiency.
Because 45g/m² Alu-Zinc requires significantly less metallic zinc mass per square meter than conventional 140g–275g galvanized steel, the embodied carbon footprint ($CO_2e$/m²) during raw material extraction and smelting is dramatically reduced. This supports EU CBAM alignment and global ESG sourcing compliance.
The global boom in solar PV mounting structures and Light Gauge Steel Framing (LGSF) modular housing requires materials with high thermal reflectivity, high yield strength (S350GD/S550GD structural grades), and extended durability in open atmospheric environments without excessive deadweight.
45g Alu-Zinc provides an outstanding conversion substrate for organic color coating (PPGL). The microscopic aluminum dendrite morphology creates superior anchor tooth topography for primer paint adhesion, drastically reducing paint blistering and undercut corrosion over decades of service.
How technical buyers specify and deploy 45g Alu Zinc steel coils across diverse geographical microclimates and demanding structural environments.
Roll-formed into trapezoidal corrugated roofing sheets (e.g., IBR, Trimdek, corrugated 762mm/840mm/900mm width). The high solar reflectance index (SRI > 65) reflects up to 75% of solar radiant heat, keeping interior building temperatures low in tropical regions across Southeast Asia, Africa, and Latin America.
Unpainted anti-fingerprint (AFP) AZ45 coils are widely slitted and lock-formed into spiral ductwork, cable trays, and internal industrial ventilation systems. The anti-fingerprint resin prevents surface oil staining and oxidation during manual field assembly.
Deep-drawing grade AZ45 coils (DX52D+AZ / DX53D+AZ) are stamped into unexposed computer chassis, refrigerator back plates, microwave internal frames, and washing machine structural brackets requiring high localized corrosion resistance without additional post-painting.
Comprehensive quality assurance processes enforced on every production batch to ensure absolute compliance with global tender requirements and national structural codes.
| Geographic Region | Applicable Standards | Key Compliance Criteria | Inspection Protocol |
|---|---|---|---|
| European Union (EU) | EN 10346 / EN 10143 | CE Marking, RoHS non-toxic passivation, strict thickness tolerances | EN 10204 3.1 MTC, 3rd Party SGS / TUV inspection |
| North America (USA / Canada) | ASTM A792 / ASTM A792M | Triple-spot coating mass check, lock-forming quality guarantee | ASTM B117 Salt spray certification, tension levelling verification |
| Asia-Pacific (JIS Market) | JIS G3321 / GB/T 14978 | Zero-spangle smooth finish, chemical anti-fingerprint surface resin | 180° Bend test (0T-2T), Tensile & Yield testing |
| Middle East & Africa | SASO / SONCAP / SIRIM | High solar reflectivity index (SRI), humidity resistance in coastal zones | Pre-shipment verification certificate (CoC), container stuffing audit |
Detailed answers to the most crucial technical, chemical, and commercial questions asked by international procurement engineers and steel importers.
"45g" refers to the total nominal metallic coating mass of 45 grams per square meter measured across both sides of the sheet (triple-spot test per ASTM A792 or EN 10346). This translates to approximately 22.5g/m² per side, corresponding to an average film thickness of roughly 6.0 microns (0.24 mils) per side.
Despite having a lower coating mass, 55% Al-Zn (AZ45) provides comparable or superior atmospheric corrosion resistance to traditional heavy galvanized steel (Z275) in rural, light industrial, and tropical environments. The aluminum-rich dendrites act as an inert barrier against atmospheric moisture and oxygen, while the zinc phase sacrifices itself at exposed cut edges.
Yes, AZ45 steel coils can be welded using spot welding, seam welding, and high-frequency induction welding (HFW/ERW). However, because aluminum has a higher electrical conductivity and melting point than pure zinc, spot welding requires slightly higher current parameters (~10–20% higher) and copper-chromium-zirconium (CuCrZr) electrode tips to minimize electrode pickup.
Anti-Fingerprint (AFP) is a microscopic organic acrylic or silicate resin coating (~1.0–1.5 µm) applied over the passivated Alu-Zinc surface. It eliminates hand-print marking during field handling, improves lubrication during roll-forming without requiring liquid oils, and provides extra protection against white rust during oceanic transit.
We supply a complete spectrum of mechanical base grades: Commercial Quality (DX51D+AZ, CS Type A/B), Deep Drawing Quality (DX52D+AZ, DX53D+AZ, FS/DDS), and High-Yield Structural Quality (S250GD+AZ to S550GD+AZ, Grade 80). Yield strengths range from 240 MPa up to 550 MPa.
Alu-Zinc exhibits a self-healing cut-edge mechanism. When exposed to ambient moisture, zinc ions from the inter-dendritic regions migrate across the fresh steel edge, forming an insoluble protective precipitate of basic zinc hydroxychloride and basic zinc carbonate ($2ZnCO_3 \cdot 3Zn(OH)_2$) that seals the edge against corrosion creep.
Standard mill production MOQ is 25 Metric Tons (one full 20ft container load) per spec thickness/width. Custom trial orders are accepted subject to raw coil availability. Production lead times typically range from 15 to 25 calendar days from order confirmation and L/C issuance.
Yes. AZ45 coils serve as an exceptional entry substrate for continuous organic coil coating lines (CCL). The fine dendritic aluminum microstructure provides superior mechanical interlock anchors for epoxy, polyurethane (PU), polyester (PE), or PVDF topcoats.
Explore our full line of specialized mill-direct steel coils, electrical silicon sheets, galvanized tubes, and structural steel products.