Explore our top-tier export items manufactured under rigid metallurgical control at our Tianjin mill complex.
An authoritative engineering breakdown of SGCC (Steel Galvanized Cold Commercial) steel coils, continuous hot-dip galvanizing parameters, and international grade equivalencies.
Technical Definition: SGCC refers to Japanese Industrial Standard (JIS G3302) defining commercial-grade, continuous hot-dip galvanized cold-rolled steel sheet and coil. Combining a ductile cold-rolled substrate (SPCC equivalent) with a metallurgically bonded zinc coating, SGCC coils offer optimal corrosion barriers, atmospheric durability, and superior formability for lock-seaming, light drawing, and structural profiling.
SGCC steel maintains strict carbon thresholds (C ≤ 0.15%, Mn ≤ 0.60%, P ≤ 0.05%, S ≤ 0.05%). This ultra-low carbon chemistry eliminates strain aging, preventing micro-cracking during complex lock-seaming (e.g., Pittsburgh lock seams in HVAC ductwork).
Minimum Yield Strength: ≥ 205 MPa. Minimum Tensile Strength: ≥ 270 MPa. Elongation: ≥ 20%. SGCC exhibits a 180° cold bend capability without zinc flaking or base metal fracturing, ensuring structural integrity across cold-forming operations.
Coating weight spans Z08 (80 g/m²) to Z275 (275 g/m² combined both sides). A Z275 coating yields approximately 20 µm per side, providing cathodic sacrifice protection where the zinc layer oxidizes preferentially to preserve the ferrous core.
Selecting the precise regional specification is vital for engineering compliance across international tenders. Below is the technical correlation between JIS, ASTM, EN, and GB standards.
| Specification / Standard | Commercial Grade | Forming / Drawing Grade | Structural Grade | Typical Yield Strength | Coating Weight Equivalence |
|---|---|---|---|---|---|
| JIS G3302 (Japan) | SGCC | SGCD1 / SGCD2 / SGCD3 | SGC340 / SGC440 / SGC570 | ≥ 205 MPa | Z08 – Z275 (g/m²) |
| ASTM A653 (USA) | CS Type A / B / C | FS Type A / B, DDS, EDDS | SS Grade 33 / 40 / 50 / 80 | ≥ 230 MPa | G30 – G90 (oz/ft²) |
| EN 10346 (Europe) | DX51D+Z | DX52D+Z / DX53D+Z / DX54D+Z | S220GD+Z to S550GD+Z | 140 – 300 MPa | Z100 – Z275 (g/m²) |
| GB/T 2518 (China) | DX51D+Z / DC51D+Z | DX52D+Z / DX53D+Z | S220GD to S550GD | ≥ 205 MPa | Z60 – Z275 (g/m²) |
How integrated metallurgical clusters, continuous galv-lines, and port-adjacent manufacturing deliver uncompromised cost efficiency and production agility.
Our Tianjin facility directly integrates hot-rolled and cold-rolled substrate steel allocations from primary state mills (Baosteel, HBIS, Shougang). This guarantees homogenous grain structure, uniform gauge tolerances (±0.02mm), and zero inclusions prior to galvanizing.
Operating high-speed 1500mm continuous galvanizing lines with induction anneal furnaces and automated air-knife systems. Real-time X-ray fluorescence coating gauges continuously adjust zinc thickness across the coil width at 180 meters per minute.
Flexible inline passivation tanks allow seamless switching between Chromate (C), Chromate-Free RoHS compliant passivations (N), Anti-Fingerprint resin coatings (AFP), and vanishing rust-inhibitive oiling (O) without line shutdown.
Situated in Jinghai, Tianjin, our factory sits within 70 km of Xingang Port (Tianjin Port). Direct port-linkage eliminates transshipment delays, lowers inland haulage overhead by $15–$25 per ton, and enables containerized or breakbulk vessel loading within 48 hours of production completion.
Mitigating international supply chain risk through standardized testing protocols, transparent mill certificates, and financial structuring tailored to global EPC contractors and distributors.
Every SGCC steel coil batch undergoes destructive and non-destructive laboratory evaluation prior to dispatch:
International tenders require absolute verification of origin, carbon footprint tracking, and metallurgical traceability:
How technological evolutions in zinc alloy formulations, AI quality monitoring, and eco-passivations are reshaping galvanized coil manufacturing.
While traditional pure zinc SGCC remains the global benchmark, next-generation Zinc-Aluminum-Magnesium (Zn-Al-Mg) coatings are rapidly expanding into coastal, agricultural, and solar photovoltaic racking applications. ZAM offers cut-edge self-healing protection through the formation of dense simonkolleite corrosion products, multiplying corrosion resistance by 5x to 10x compared to standard GI.
Modern continuous galv-lines incorporate high-speed machine vision arrays equipped with convolutional neural networks. Operating at 200 frames per second, these systems instantly detect, classify, and map minor surface anomalies (such as pinholes, zinc dross, or roll marks), generating digital defect maps for every exported coil master roll.
Eliminating hazardous hexavalent chromium (Cr6+) without compromising corrosion resistance was historically a major engineering hurdle. Modern SGCC production utilizes titanium-silicate nanocomposite passivations that chemically cross-link with the metallic zinc surface, delivering equal or superior humidity resistance while ensuring compliance with global environmental mandates.
Tailoring coating weight, spangle finish, and coil temper to match specialized downstream manufacturing environments.
Recommended Spec: SGCC, Zero Spangle, Z120 - Z180, Chromate-Free Passivated, Unoiled.
Duct fabrication requires high-speed roll forming and intricate Pittsburgh lock-seaming. Zero spangle SGCC ensures a smooth, non-flaking surface that prevents microscopic zinc degradation along seams, maintaining airtight integrity in commercial ventilation projects.
Recommended Spec: SGCC / Structural SGC440, Regular Spangle, Z275 Heavy Zinc, Oiled.
For structural C/Z purlins, stud framing, and floor joists exposed to atmospheric moisture during construction, a Z275 coating (275 g/m²) provides decades of sacrificial protection against edge rust in load-bearing frames.
Recommended Spec: SGCC, Zero Spangle / Skin Passed, Anti-Fingerprint Coating (AFP), Resinated.
Used for refrigerator side panels, washing machine bodies, and server racks. The transparent acrylic Anti-Fingerprint (AFP) resin layer protects against sweat corrosion during assembly while providing an ultra-flat surface for immediate powder coating or painting.
Recommended Spec: SGCC, Regular Spangle, Z200 - Z275, Passivated & Oiled.
Poultry farm structures, greenhouse frames, and silo cladding face harsh microclimates involving elevated humidity and organic ammonia vapors. Heavy galvanizing resists chemical attack and premature pitting.
Preventing moisture ingress, transit vibration damage, and white rust through engineered export packaging systems.
Depending on port discharge equipment and buyer uncoiling mandrels, coils are wrapped in multi-layer protective barriers:
SMSTEEL maintains dedicated technical support teams for regional markets across Europe, South America, the Middle East, Southeast Asia, and Africa:
In-depth answers addressing procurement parameters, metallurgical choices, testing procedures, and logistical execution.
Your trusted Tianjin steel mill direct supply chain partner since 2010.
Founded in 2010, Step Million Steel Supply Chain Co., Ltd. (SMSTEEL) operates a state-of-the-art 66,700 square meter manufacturing complex in No. 8 Juhai Road, Jinghai Development Area, Tianjin, China. Employing over 300 skilled technicians and engineers, SMSTEEL houses eight high-frequency welded pipe lines and advanced cold-rolling/galvanizing processing facilities.
Our monthly output exceeds 100,000 metric tons, with over 50% distributed directly to international markets spanning 80+ countries and regions. From structural steel contractors and solar racking manufacturers to home appliance OEMs and transformer stampers, global enterprises choose SMSTEEL for mill-direct pricing, guaranteed metallurgical compliance, and rapid sea shipping.
Check our comprehensive product catalog for structural, flat, and specialized steel products manufactured for export.