High-Quality CRNGO 50AW800 Supplier & Factory

Technical Whitepaper: Engineering Performance, Metallurgical Precision, Global Procurement Demand, and Industrial Motor Application Solutions for Cold Rolled Non-Grain Oriented Electrical Steel Coils.

Featured Silicon Steel & Metallurgical Coils

Direct factory inventory and customized cold-rolled electrical steel, structural tubing, and precision coated coils engineered to international standards.

CRNGO M310 M350 M470 M600 M800 Steel Coil
High-Quality Non-Grain Oriented Silicon Steel Coil CRNGO M310 M350 M470 M600 M800
View Product Details
China Square Tube Suppliers
High-Quality China Square Tube Suppliers | Steel Square Tube from Trusted Factory
View Product Details
ASTM Carbon Steel Seamless Pipe
Wholesale ASTM Carbon Steel Seamless Pipe from China Suppliers & Reliable Factory
View Product Details
Cold Rolled Stainless Steel Coil
High-Quality Cold Rolled 201 304 316 321 430 Stainless Steel Coil Supplier
View Product Details
DX53D DX54D Aluminized Silicon Coating Coils
DX53D DX54D Aluminized Silicon Coating Coils for Industrial & Thermal Applications
View Product Details
Steel Angle Iron Beam Q195 Q215
Steel Angle Iron Beam Q195 Q215 Hot Rolled Structural Parts for Building
View Product Details
Hot Rolled Steel Plate
Wholesale Hot Rolled Steel Plate from China Suppliers - Premium Factory Quality
View Product Details
ASTM A106 Sch 40 ERW Carbon Steel Pipe
ASTM A106 Sch 40 ERW Iron Tube & Carbon Steel Pipe Manufacturers & Suppliers
View Product Details
0.50 mm
Nominal Gauge Precision
≤ 8.00 W/kg
Max Core Loss (P1.5/50)
≥ 1.70 T
Min Magnetic Induction (B50)
100,000 t
Monthly Mill Output
Industry Whitepaper • Sourcing Guide

Executive Summary: Global Procurement Demand for CRNGO 50AW800 Silicon Steel

Cold Rolled Non-Grain Oriented (CRNGO) silicon steel is the magnetic core material that powers modern electromechanical energy conversion. Among the standard commercial grades defined under international standards like JIS C 2552, EN 10126, and ASTM A677, CRNGO 50AW800 (equivalent to 50R800, M800-50A, or 50W800) represents one of the most critical structural alloys for mass-scale industrial electrification. Characterized by a nominal sheet thickness of 0.50 mm and a maximum guaranteed core loss of 8.00 W/kg at 1.5 Tesla and 50 Hz ($P_{1.5/50}$), 50AW800 delivers an optimal equilibrium between raw material cost, stamping workability, and magnetic permeability.

As energy efficiency mandates accelerate worldwide—such as the IEC 60034-30-1 standard for industrial electric motors (IE2, IE3, and IE4 standards) and equivalent regional regulations in North America, the European Union, and Asia-Pacific—procurement officers, electrical design engineers, and tier-1 motor laminators are increasingly demanding certified high-grade 50AW800 from reliable manufacturing sources. Global market intent mining reveals three major macro drivers governing procurement demand:

HVAC & Hermetic Compressors

Massive integration into residential and commercial air conditioning compressor stators where balanced high magnetic flux density ($B_{50} \ge 1.70\text{ T}$) reduces operating current and copper winding volume while keeping thermal dissipation manageable.

Fractional HP & Industrial Motors

Extensive utilization in general-purpose industrial induction motors, water pumps, ventilation blowers, and power tools. 50AW800 serves as the reliable workhorse providing low core loss without the price premium of high-silicon premium grades.

Transformers & Small Reactors

Crucial material for small power transformers, distribution reactor cores, welding transformers, and electronic ballasts where isotropic magnetic properties ensure consistent flux path efficiency across 360 degrees.

Information Gain Insight: Silicon Balance vs. Magnetic Permeability

Unlike grain-oriented electrical steel (CRGO) which concentrates magnetic domains strictly in the rolling direction, CRNGO 50AW800 is engineered via controlled continuous annealing to develop an isotropic crystal texture ($\{100\}\langle 001\rangle$ and $\{100\}\langle 011\rangle$ orientations). By maintaining silicon addition near ~1.0% - 1.3%, 50AW800 avoids the brittleness of 3.0% Si alloys, enabling high-speed punching speeds exceeding 300 strokes/min while preserving tool die longevity.

Metallurgical Specifications & Standard Equivalence

Cross-referencing global non-grain oriented electrical steel standards to simplify cross-border sourcing and engineering substitution.

Understanding regional designation nuances is essential for global procurement engineering. "50AW800" follows the standard Japanese JIS C 2552 / Asian industrial naming convention where 50 denotes 0.50 mm nominal thickness, A/AW designates non-grain oriented electrical steel, and 800 represents 100 times the maximum iron loss value ($8.00\text{ W/kg}$). Below is the engineering equivalence matrix across international standards:

Standard Body Grade Designation Nominal Thickness Max Core Loss $P_{1.5/50}$ (W/kg) Min Induction $B_{50}$ (T) Density ($\text{g/cm}^3$)
JIS C 2552 (Japan) 50R800 / 50A800 0.50 mm ≤ 8.00 ≥ 1.70 7.75
EN 10126 (Europe) M800-50A 0.50 mm ≤ 8.00 ≥ 1.68 7.75
ASTM A677 (USA) 47F500 / 47F450 Equiv. 0.47 - 0.50 mm ≤ 8.20 (@ 60Hz adj.) ≥ 1.68 7.75
GB/T 2521.1 (China) 50W800 0.50 mm ≤ 8.00 ≥ 1.70 7.75
Baosteel / WISCO B50A800 / 50WW800 0.50 mm ≤ 7.50 (Typical 6.85) ≥ 1.71 7.75
POSCO (Korea) 50PN800 0.50 mm ≤ 7.80 ≥ 1.70 7.75

Chemical Composition & Physical Properties

The chemical composition of CRNGO 50AW800 is precisely alloyed during secondary steelmaking (LF + RH Vacuum Degassing) to balance electrical resistivity and magnetic induction:

Manufacturing Process Route & Technology Roadmap

From liquid iron refining to continuous annealing and surface insulation: How premium CRNGO 50AW800 is manufactured in our Tianjin mill facility.

Achieving consistent electromagnetic properties across thousands of coil metric tons requires stringent metallurgical process control at every phase of production. The operational flowchart below outlines our integrated manufacturing route:

01
Vacuum Degassing
RH Vacuum treatment removes C, H, N, O impurities down to single-digit ppm levels to ensure zero magnetic aging.
02
Hot Rolling
Precision slab reheating and multi-pass tandem hot rolling to produce 2.0-2.5 mm hot rolled electrical bands.
03
Pickling & Cold Rolling
Continuous HCl pickling followed by 20-high Sendzimir cold rolling mill reduction to 0.50 mm nominal thickness (±0.01mm tolerance).
04
Decarb & Annealing
High-temperature continuous annealing in $H_2+N_2$ atmosphere to promote optimal ferrite grain growth ($50 - 80 \ \mu\text{m}$).
05
Insulation Coating
Inline liquid roll-coating of eco-friendly chromate-free organic or semi-organic insulation varnish followed by thermal curing.

Core Loss Decomposition: Hysteresis vs. Eddy Current Loss

In alternating magnetic fields, total core loss ($P_t$) in 50AW800 laminations is composed of two primary components:

P_t = P_h + P_e = (K_h \cdot f \cdot B_m^n) + \left( \frac{\pi^2 \cdot d^2 \cdot f^2 \cdot B_m^2}{6 \cdot \rho \cdot D} \right)

Where $P_h$ = Hysteresis Loss, $P_e$ = Classical Eddy Current Loss, $d$ = sheet thickness (0.50 mm), $f$ = frequency (50/60 Hz), $\rho$ = electrical resistivity, and $D$ = material density.

Our production control optimizes grain diameter to approximately 65 $\mu\text{m}$. This specific grain dimension minimizes total losses: larger grains reduce hysteresis loss ($P_h$) by offering fewer grain boundaries to domain wall motion, while preventing excessive grain growth that would otherwise elevate eddy current loss ($P_e$).

Surface Insulation Coatings & Processing Guidelines

Enhancing interlaminar resistance, die wear life, and thermal resistance across diverse electrical engineering applications.

CRNGO 50AW800 coils are supplied with thin, tightly adherent surface insulation coatings on both sides. The choice of coating determines interlaminar resistance, die life during stamping, heat resistance during stress-relief annealing (SRA), and corrosion protection during storage.

C-3 / Organic Coating

Characteristics: Organic resin based coating (thickness 0.9 – 1.5 $\mu\text{m}$). Excellent punchability, extending stamping die tool life by up to 40% compared to bare steel. Superior flexibility and corrosion resistance. Ideal for non-annealed stator/rotor laminations.

C-5 / Semi-Organic Coating

Characteristics: Inorganic matrix with organic additives (thickness 1.0 – 2.0 $\mu\text{m}$). Offers balanced performance: good punchability combined with thermal stability capable of withstanding Stress Relief Annealing (SRA) at 750°C for 2 hours in a protective atmosphere.

C-6 / Inorganic Coating

Characteristics: Phosphate or silicate ceramic based. High thermal resistance up to 850°C, outstanding interlaminar resistance ($\ge 100 \ \Omega\cdot\text{cm}^2/\text{lamination}$), and complete resistance to transformer oil and refrigerant environments.

Stamping, Slitting, and Stress Relief Annealing (SRA) Best Practices

To maximize the final magnetic efficiency of stamped motor stators and rotors fabricated from 50AW800 silicon steel coils, adhere to the following technical recommendations:

Quality Control Protocols & Mill Certification (E-E-A-T)

Rigorous lab testing and international standards compliance ensure zero quality claims and full traceability.

As an established manufacturer and global exporter based in Tianjin, China, Step Million Steel Supply Chain Co., Ltd. (SMSTEEL) operates an ISO 9001:2015 and IATF 16949 certified quality management system. Every production batch of CRNGO 50AW800 undergoes comprehensive testing prior to dispatch:

Epstein Frame & SST Testing (IEC 60404-2 / 60404-3)

Magnetic loss ($P_{1.5/50}$) and magnetic induction ($B_{50}$) are measured using standard 25cm Epstein frames and Single Sheet Testers (SST) on samples taken from both ends of every master coil. Mill Test Certificates (MTC EN 10204 3.1) accompany every shipment.

Dimensional Tolerance & Surface Inspection

Online continuous gamma-ray gauge monitoring ensures longitudinal and transverse thickness tolerances remain within ±0.01 mm. Automated optical surface defect detectors inspect for oil stains, scratches, or coating voids.

Environmental Compliance: RoHS, REACH & CBAM Ready

All surface insulation varnishes applied to our 50AW800 coils comply with EU RoHS Directive 2011/65/EU and REACH SVHC regulations (free of hexavalent chromium, lead, mercury, and polybrominated biphenyls). Carbon footprint emission data is documented to support EU Carbon Border Adjustment Mechanism (CBAM) filings for European importers.

Frequently Asked Questions (FAQ) & Sourcing Technicalities

Clear answers to technical and procurement questions asked by electrical engineers and purchasing managers.

What is the exact meaning of the grade code "50AW800"?
In standard industrial parlance, 50 indicates a nominal strip thickness of 0.50 mm. AW (or A / W) stands for Cold Rolled Non-Grain Oriented Electrical Steel. 800 represents the maximum guaranteed core loss value multiplied by 100, which equals $8.00\text{ W/kg}$ measured at an alternating magnetic field density of 1.5 Tesla and a frequency of 50 Hz ($P_{1.5/50}$).
How does 50AW800 compare to premium grades like 50AW470 or 35A300?
Higher-grade silicon steels like 50AW470 (Core loss $\le 4.70\text{ W/kg}$) contain higher silicon content (~2.5%-3.0%), which lowers total core loss but increases material cost and decreases magnetic saturation induction ($B_{50}$). 50AW800 contains lower silicon (~1.2%), making it more economical, highly ductile, easier to punch at high speeds, and possessing higher magnetic flux density ($B_{50} \ge 1.70\text{ T}$ vs $1.65\text{ T}$ in high-silicon grades).
Is Stress Relief Annealing (SRA) mandatory after punching 50AW800?
SRA is not strictly mandatory for standard fractional horsepower motors or general appliances where low production cost is paramount. However, for high-efficiency motors (IE3/IE4) or small distribution transformers, SRA at $750^\circ\text{C}$ relieves punching shear stresses and restores core loss performance back to factory specs.
What packaging is utilized to prevent sea freight corrosion?
Coils are wrapped in heavy-duty VCI (Vapor Corrosion Inhibitor) anti-rust film, enclosed in galvanized steel outer shrouds with inner and outer metal edge protectors, and secured with radial and circumferential high-tensile steel straps on wooden pallets (Eye-to-Side or Eye-to-Sky orientation) suitable for long-distance maritime transport.
Can you supply custom slit coil widths for automated punching lines?
Yes. While standard mill master coils range from 900 mm to 1250 mm in width, our factory operates high-precision inline slitting equipment capable of delivering slit strips from 15 mm up to 1200 mm with minimal burr height ($\le 0.015\text{ mm}$).
What minimum order quantities (MOQ) and lead times apply for export orders?
For stock dimensions, trial orders can be dispatched starting from 5 to 10 metric tons. Custom production runs carry a standard MOQ of 25 metric tons (1 full container load) with typical factory lead times of 15 to 25 business days from order confirmation.

Explore Our Full Range of Steel Products

Integrated supply chain solutions including cold-rolled stainless steel, galvanized coils, galvannealed sheets, and tinplate products.

8K Cold Rolled Stainless Steel Coil
Wholesale 8K Cold Rolled Stainless Steel Coil 201 304 316 430 2205 904L Suppliers
View Product Details
High Quality Hot Rolled Steel Plate
High-Quality Hot Rolled Steel Plate from China Suppliers & Factory Direct
View Product Details
Cold Rolled Steel Sheets for Deep Drawing
High Strength Cold Rolled Steel Sheets for Deep Drawing - Leading China Factory
View Product Details
Electro Galvanized Steel Coils
Electro Galvanized Steel Coils for Door Gates & Panels - High Quality Manufacturer
View Product Details
Galvannealed Steel Coil DC51D DX51D
DC51D DX51D ZF60 ZF275 Galvannealed Steel Coil with Zinc Iron Alloy Coating
View Product Details
SECC SECD SECE Electro-Galvanized Steel Plate
SECC / SECD / SECE Electro-Galvanized Steel Plate with Superior Durability Coating
View Product Details
Galvalume Aluzinc Roofing Sheets
Galvalume Aluzinc Zinc Aluminum Coating Roofing Sheets Corrugated Panels
View Product Details
Electrolytic Tinplate ETP and TFS Steel
Electrolytic Tinplate (ETP) & TFS Tin Clad Steel for Packaging & Industrial Use
View Product Details