Explore our top-tier cold-rolled electrical steel, specialty coated coils, and structural steel products manufactured under ISO9001 and IEC 60404-8 standards.
Cold-Rolled Non-Grain-Oriented (CRNGO) silicon steel designated as 50W350 represents the golden mean of electromagnetic performance, structural formability, and cost-efficiency for rotating electrical machines.
The grade designation 50W350 directly encodes its primary physical dimensions and electromagnetic limits under standard laboratory testing criteria:
At SMSTEEL, 50W350 is melted using ultra-clean vacuum degassing technology. The iron-silicon alloy matrix is engineered with approximately 2.8% to 3.2% Silicon (Si) and 0.4% to 0.8% Aluminum (Al) to increase electrical resistivity and minimize hysteresis loss.
Carbon content is strictly maintained below 0.005% to eliminate magnetic aging, while harmful impurities like sulfur, nitrogen, and titanium are refined to PPM levels to permit unhindered grain boundary growth during recrystallization annealing.
When sourcing globally, 50W350 (GB/T 2521) directly aligns with M350-50A (IEC 60404-8-4 / EN 10126), 50A350 (JIS C2552), 50FA350 (POSCO), and M-36 (AISI/ASTM A677). All these standards govern non-oriented fully-processed electrical steel sheets provided with surface insulating organic/inorganic coatings.
Select the optimal grade for your motor efficiency target (IE2, IE3, IE4) by comparing core magnetic parameters:
| Steel Grade Standard | Nominal Thickness (mm) | Max Core Loss P1.5/50 (W/kg) | Max Core Loss P1.0/50 (W/kg) | Min Magnetic Flux B50 (Tesla) | Lamination Stacking Factor (%) |
|---|---|---|---|---|---|
| 50W350 (SMSTEEL Premium) | 0.50 | ≤ 3.50 | ≤ 1.45 | ≥ 1.71 | ≥ 96.5% |
| 50W290 (High Efficiency Grade) | 0.50 | ≤ 2.90 | ≤ 1.20 | ≥ 1.69 | ≥ 96.5% |
| 50W470 (Standard Duty Grade) | 0.50 | ≤ 4.70 | ≤ 1.90 | ≥ 1.73 | ≥ 97.0% |
| 50W600 (Economy Grade) | 0.50 | ≤ 6.00 | ≤ 2.40 | ≥ 1.74 | ≥ 97.0% |
| 35W300 (Ultra-Thin High Frequency) | 0.35 | ≤ 3.00 | ≤ 1.15 | ≥ 1.68 | ≥ 95.5% |
Driven by international energy efficiency regulations and the accelerated electrification of industrial prime movers, demand for 0.50mm high-permeability silicon steel has transitioned from a basic commodity to a strategically regulated material.
Regulatory frameworks such as the EU EcoDesign Directive 2019/1781, the US Department of Energy (DOE) 2027 Efficiency Regulations, and China's GB 18613-2020 make IE3 (Premium Efficiency) mandatory and IE4 (Super-Premium) strongly incentivized.
Switching motor stators from legacy 50W600 to SMSTEEL 50W350 enables manufacturers to eliminate 25–35% of core losses, achieving mandatory IE3/IE4 thresholds without changing existing casting frame sizes.
Variable-refrigerant-flow (VRF) HVAC compressors, heat pump drives, and commercial refrigeration units demand motor cores that operate reliably under variable frequency drive (VFD) power supplies.
50W350 offers stable magnetic permeability and exceptionally low harmonic hysteresis when operated across 50Hz to 200Hz frequency sweeps, making it the globally accepted benchmark for inverter compressor stators.
With Western mills facing extended lead times and premium pricing structures, Tier-1 transformer and motor fabricators across Europe, North America, Southeast Asia, and the Middle East rely on Chinese manufacturers like SMSTEEL.
Our mill-direct supply chain bridges supply deficits, delivering mill-certified 50W350 coils in slitted widths from 20mm to 1250mm within accelerated 15-to-25 day dispatch timelines.
Headquartered in the Jinghai Development Area, Tianjin, Step Million Steel Supply Chain Co., Ltd. (SMSTEEL) operates a modern 66,700 m² production base engineered to produce world-class electrical silicon steel and specialized tubular products.
Our mill integrates state-of-the-art multi-roll cold rolling mills capable of maintaining continuous gauge uniformity within tight tolerances (±0.010 mm). Our continuous decarbonization and recrystallization annealing line features automated atmosphere control (N2-H2 dry/wet gas mix) to prevent surface oxidation while producing clean grain growth.
To reduce interlaminar eddy currents and extend stamping die lifespans, SMSTEEL offers precise automated roll-coating application of eco-friendly insulation systems:
How electrical engineers and plant procurement directors deploy SMSTEEL 50W350 CRNGO to resolve technical challenges across key industrial sectors.
Challenge: Continuous duty (S1) 15kW–250kW industrial pumps operated under high ambient temperatures frequently experience thermal breakdown caused by core losses in low-grade steel stators.
SMSTEEL Solution: Stamping stators with 50W350 C-5 coated steel reduces hysteresis heating by ~22%. Lower operating temperatures preserve winding insulation longevity and enable compliance with IE3 / IE4 efficiency standards.
Challenge: Small dry-type transformers and arc-welding reactors suffer from power losses and excessive magnetic hum (magnetostriction noise) under continuous loading.
SMSTEEL Solution: With high excitation induction (B50 ≥ 1.71 T) and low magnetostrictive expansion coefficient, 50W350 cut-sheets produce quiet transformer cores with high saturation threshold and minimized core losses under non-linear loads.
Challenge: Hermetic compressors require motor laminations that withstand exposure to synthetic ester oils and fluorinated refrigerants without coating degradation.
SMSTEEL Solution: SMSTEEL's C-5 inorganic hybrid insulation coating resists chemical dissolution by R32, R410A, and R134a refrigerants, maintaining high interlaminar resistance across decades of operation.
Challenge: Direct-drive wind turbine auxiliary generators and small hydro generators require large-diameter segmented stators with high magnetic permeability at low rotational speeds.
SMSTEEL Solution: SMSTEEL supplies wide master coils (up to 1250mm) with flat surface profile and minimal thickness deviation across the width, ensuring uniform gap density and rapid core stacking.
As global power systems shift toward high-frequency inverter drives and smart microgrids, SMSTEEL is advancing CRNGO manufacturing technologies through dedicated R&D investments.
Transitioning from 0.50mm to 0.30mm and 0.20mm ultra-thin CRNGO grades designed to minimize high-frequency eddy losses in high-speed EV traction motors operating above 400Hz.
Deploying AI vision systems and electromagnetic sensors along annealing lines to dynamically tune line speed and dew point, optimizing crystallographic texture (100) orientation.
Developing next-generation self-bonding and eco-friendly bio-based insulation coatings that eliminate thermal curing emissions while providing elevated interlaminar breakdown voltage.
Integrating hydrogen direct-reduced iron (H2-DRI) and electric arc furnace (EAF) steelmaking to deliver fully decarbonized "Green Silicon Steel" certified under global EPD standards.
Explore our full range of industrial steel coils, roofing panels, specialized zinc-aluminum-magnesium coatings, and structural components manufactured by SMSTEEL.
In-depth answers to critical metallurgical, electrical, and logistical questions frequently raised by procurement officers and electrical design engineers.
CRNGO (50W350) features isotropic magnetic properties, meaning its magnetic permeability and core losses are essentially uniform in all directions within the rolling plane. This isotropic response is essential for rotating electrical machinery such as electric motors, generators, and HVAC compressors where the magnetic field continuously rotates 360 degrees.
In contrast, CRGO (Grain-Oriented Steel) possesses highly anisotropic magnetic properties, optimized exclusively along its rolling direction. CRGO is utilized in static electrical equipment like power and distribution transformer cores, where flux lines remain unidirectional.
Mechanical shearing, slitting, and high-speed die punching introduce physical shear stress along the cut edges of 50W350 laminations. This cold working localized strain damages crystal lattice symmetry, causing localized core losses to increase by 10% to 25% near the cut edge zone (0.5mm to 2mm inward).
For high-efficiency IE4/IE5 motor builds, SMSTEEL recommends a post-stamping Stress Relief Annealing (SRA) process at 720°C to 750°C in a neutral protective atmosphere for 2 hours. SRA fully restores crystal lattice perfection, eliminating mechanical stress and recovering pristine guaranteed magnetic loss limits (≤3.50 W/kg).
Select C-3 (Organic Coating) if your core assembly process does not involve subsequent high-temperature stress-relief annealing. C-3 provides maximum die lubrication, reducing stamping tool wear and extending die lifetime by up to 30%.
Select C-5 (Inorganic-Organic Hybrid / Chrome-Free) if your core manufacturing requires stress-relief annealing (up to 750°C), aluminium die-casting of rotor bars, or operates in hermetic environments exposed to oils and refrigerants. C-5 provides elevated temperature resistance, high interlaminar electrical resistance, and superior weldability during core stacking.
SMSTEEL maintains strict manufacturing tolerances for 50W350 CRNGO coils:
Every shipment is accompanied by an original Mill Test Certificate (MTC) according to EN 10204 3.1. The certificate certifies heat chemical analysis (Si, Al, C, S, N, Mn), Epstein frame magnetic loss (P1.5/50Hz), magnetic flux induction (B50), stacking factor percentage, coating weight/thickness, and dimensional verification.
Third-party inspections conducted by independent agencies such as SGS, Bureau Veritas (BV), or Intertek can be arranged upon request prior to vessel loading at Tianjin Port.